[PATCH 1/2] power_supply: max17042: Add OF support for setting thresholds
Krzysztof Kozlowski
k.kozlowski at samsung.com
Sun Jun 7 18:11:38 PDT 2015
The commit edd4ab055931 ("power: max17042_battery: add HEALTH and TEMP_*
properties support") added support for setting voltage and temperature
thresholds with platform data. For DeviceTree default of 0 was always
used.
This caused reporting battery health always as over voltage or
over heated.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Fixes: edd4ab055931 ("power: max17042_battery: add HEALTH and TEMP_* properties support")
---
.../devicetree/bindings/power_supply/max17042_battery.txt | 13 +++++++++++++
drivers/power/max17042_battery.c | 9 +++++++++
2 files changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/power_supply/max17042_battery.txt b/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
index 5bc9b685cf8a..3f3894aaeebc 100644
--- a/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
+++ b/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
@@ -9,10 +9,23 @@ Optional properties :
(datasheet-recommended value is 10000).
Defining this property enables current-sense functionality.
+Optional threshold properties :
+ If skipped the condition won't be reported.
+ - maxim,cold-temp : Temperature threshold to report battery
+ as cold (in tenths of degree Celsius).
+ - maxim,over-heat-temp : Temperature threshold to report battery
+ as over heated (in tenths of degree Celsius).
+ - maxim,dead-volt : Voltage threshold to report battery
+ as dead (in mV).
+ - maxim,over-volt : Voltage threshold to report battery
+ as over voltage (in mV).
+
Example:
battery-charger at 36 {
compatible = "maxim,max17042";
reg = <0x36>;
maxim,rsns-microohm = <10000>;
+ maxim,over-heat-temp = <600>;
+ maxim,over-volt = <4300>;
};
diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c
index 62908eba2763..a8e16364c2aa 100644
--- a/drivers/power/max17042_battery.c
+++ b/drivers/power/max17042_battery.c
@@ -818,6 +818,15 @@ max17042_get_pdata(struct device *dev)
pdata->enable_current_sense = true;
}
+ if (of_property_read_s32(np, "maxim,cold-temp", &pdata->temp_min))
+ pdata->temp_min = INT_MIN;
+ if (of_property_read_s32(np, "maxim,over-heat-temp", &pdata->temp_max))
+ pdata->temp_max = INT_MAX;
+ if (of_property_read_s32(np, "maxim,dead-volt", &pdata->vmin))
+ pdata->vmin = INT_MIN;
+ if (of_property_read_s32(np, "maxim,over-volt", &pdata->vmax))
+ pdata->vmax = INT_MAX;
+
return pdata;
}
#else
--
1.9.1
More information about the linux-arm-kernel
mailing list