[PATCH v4 1/3] ARM: rockchip: fix the CPU soft reset
Caesar Wang
wxt at rock-chips.com
Sat Jun 6 19:51:54 PDT 2015
在 2015年06月06日 04:55, Doug Anderson 写道:
> Caesar,
>
> On Fri, Jun 5, 2015 at 10:05 AM, Caesar Wang <wxt at rock-chips.com> wrote:
>> + if (!on)
>> + reset_control_assert(rstc);
>> +
>> + ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
>> + if (ret < 0) {
>> + pr_err("%s: could not update power domain\n", __func__);
>> + reset_control_put(rstc);
>> + return ret;
>> + }
>> +
>> if (on)
>> reset_control_deassert(rstc);
>> - else
>> - reset_control_assert(rstc);
> As Heiko indicated in the previous patchset, he thought it would be
> nice to move the 'pmu_power_domain_is_on(pd)' to before you deasserted
> reset. ...but then I pointed out that you tested that in patch set #2
> and it didn't work.
>
> Talking to Heiko offline he thought that perhaps you could make
> 'pmu_power_domain_is_on(pd)' work if you increased your 'udelay(10);'
> in rockchip_boot_secondary(). Perhaps the old
> 'pmu_power_domain_is_on' was acting like an extra bit of delay and
> that's why moving it broke things.
>
>
> I actually went back and tested patch set #2 and it worked for me, so
> I couldn't test Heiko's theory. Could you go and reproduce the
> problem with patch set #2 again and then try increasing the udelay()
> and see if your problems go away? If that works, it might be a
> slightly better solution. Note that I think Heiko had a slightly
> cleaner version of your patch set #2 that he posted in response to
> your patch set #3.
@@ -150,13 +159,15 @@ static int __cpuinit
rockchip_boot_secondary(unsigned int cpu,
* sram_base_addr + 4: 0xdeadbeaf
* sram_base_addr + 8: start address for pc
* */
- udelay(10);
+ udelay(20);
I increased the 'udelay(20)' or 'udelay(50)' in rockchip_boot_secondary().
Set#2 also can repro this issue over 22600 cycles with testing scripts.
(about 1 hours)
log:
================= 226 ============
[ 4069.134419] CPU1: shutdown
[ 4069.164431] CPU2: shutdown
[ 4069.204475] CPU3: shutdown
......
[ 4072.454453] CPU1: shutdown
[ 4072.504436] CPU2: shutdown
[ 4072.554426] CPU3: shutdown
[ 4072.577827] CPU1: Booted secondary processor
[ 4072.582611] CPU2: Booted secondary processor
[ 4072.587426] CPU3: Booted secondary processor
<hang>
The set #4 will be better work.
>
> -Doug
>
>
>
--
Thanks,
- Caesar
More information about the linux-arm-kernel
mailing list