[PATCH v5 6/6] target-arm: kvm - re-inject guest debug exceptions
Peter Maydell
peter.maydell at linaro.org
Thu Jun 4 04:29:49 PDT 2015
On 29 May 2015 at 16:19, Alex Bennée <alex.bennee at linaro.org> wrote:
> From: Alex Bennée <alex at bennee.com>
>
> If we can't find details for the debug exception in our debug state
> then we can assume the exception is due to debugging inside the guest.
> To inject the exception into the guest state we re-use the TCG exception
> code (do_interupt).
>
> However while guest debugging is in effect we currently can't handle the
> guest using single step which is heavily used by GDB.
Is this just the kernel not supporting this, or would QEMU need
to change as well? Worth mentioning either way.
> Signed-off-by: Alex Bennée <alex.bennee at linaro.org>
>
> ---
> v5:
> - new for v5
> ---
> target-arm/cpu.h | 1 +
> target-arm/helper-a64.c | 17 ++++++++++++++---
> target-arm/internals.h | 1 +
> target-arm/kvm.c | 30 ++++++++++++++++++++++--------
> 4 files changed, 38 insertions(+), 11 deletions(-)
>
> diff --git a/target-arm/cpu.h b/target-arm/cpu.h
> index 083211c..95ae3a8 100644
> --- a/target-arm/cpu.h
> +++ b/target-arm/cpu.h
> @@ -56,6 +56,7 @@
> #define EXCP_SMC 13 /* Secure Monitor Call */
> #define EXCP_VIRQ 14
> #define EXCP_VFIQ 15
> +#define EXCP_WAPT 16
Why do we need a new EXCP value here? In hardware watchpoints
are reported via a particular syndrome value and (for AArch32)
as Data Aborts, so I would expect that we would just do the same.
The code in this patch doesn't seem to treat EXCP_WAPT any
differently from EXCP_DABT...
> #define ARMV7M_EXCP_RESET 1
> #define ARMV7M_EXCP_NMI 2
> diff --git a/target-arm/helper-a64.c b/target-arm/helper-a64.c
> index 861f6fa..32bd27d 100644
> --- a/target-arm/helper-a64.c
> +++ b/target-arm/helper-a64.c
> @@ -25,6 +25,7 @@
> #include "qemu/bitops.h"
> #include "internals.h"
> #include "qemu/crc32c.h"
> +#include "sysemu/kvm.h"
> #include <zlib.h> /* For crc32 */
>
> /* C2.4.7 Multiply and divide */
> @@ -478,10 +479,13 @@ void aarch64_cpu_do_interrupt(CPUState *cs)
> }
>
> arm_log_exception(cs->exception_index);
> - qemu_log_mask(CPU_LOG_INT, "...from EL%d\n", arm_current_el(env));
> + qemu_log_mask(CPU_LOG_INT, "...from EL%d PC 0x%" PRIx64 "\n",
> + arm_current_el(env), env->pc);
> +
> if (qemu_loglevel_mask(CPU_LOG_INT)
> && !excp_is_internal(cs->exception_index)) {
> - qemu_log_mask(CPU_LOG_INT, "...with ESR 0x%" PRIx32 "\n",
> + qemu_log_mask(CPU_LOG_INT, "...with ESR %x/0x%" PRIx32 "\n",
> + env->exception.syndrome >> ARM_EL_EC_SHIFT,
> env->exception.syndrome);
> }
If you just want to improve our debug logging that should be
a separate patch.
>
> @@ -494,6 +498,7 @@ void aarch64_cpu_do_interrupt(CPUState *cs)
> switch (cs->exception_index) {
> case EXCP_PREFETCH_ABORT:
> case EXCP_DATA_ABORT:
> + case EXCP_WAPT:
> env->cp15.far_el[new_el] = env->exception.vaddress;
> qemu_log_mask(CPU_LOG_INT, "...with FAR 0x%" PRIx64 "\n",
> env->cp15.far_el[new_el]);
> @@ -539,6 +544,12 @@ void aarch64_cpu_do_interrupt(CPUState *cs)
> aarch64_restore_sp(env, new_el);
>
> env->pc = addr;
> - cs->interrupt_request |= CPU_INTERRUPT_EXITTB;
> +
> + qemu_log_mask(CPU_LOG_INT, "...to EL%d PC 0x%" PRIx64 " PSTATE 0x%x\n",
> + new_el, env->pc, pstate_read(env));
> +
> + if (!kvm_enabled()) {
> + cs->interrupt_request |= CPU_INTERRUPT_EXITTB;
> + }
Do we need a similar change in the AArch32 do_interrupt
code, to handle the case of debugging a 32-bit guest?
> }
> #endif
> diff --git a/target-arm/internals.h b/target-arm/internals.h
> index 2cc3017..10e8999 100644
> --- a/target-arm/internals.h
> +++ b/target-arm/internals.h
> @@ -58,6 +58,7 @@ static const char * const excnames[] = {
> [EXCP_SMC] = "Secure Monitor Call",
> [EXCP_VIRQ] = "Virtual IRQ",
> [EXCP_VFIQ] = "Virtual FIQ",
> + [EXCP_WAPT] = "Watchpoint",
> };
>
> static inline void arm_log_exception(int idx)
> diff --git a/target-arm/kvm.c b/target-arm/kvm.c
> index e1fccdd..6f608d8 100644
> --- a/target-arm/kvm.c
> +++ b/target-arm/kvm.c
> @@ -523,9 +523,11 @@ static int kvm_handle_debug(CPUState *cs, struct kvm_run *run)
> struct kvm_debug_exit_arch *arch_info = &run->debug.arch;
> int hsr_ec = arch_info->hsr >> ARM_EL_EC_SHIFT;
> ARMCPU *cpu = ARM_CPU(cs);
> + CPUClass *cc = CPU_GET_CLASS(cs);
> CPUARMState *env = &cpu->env;
> + int forward_excp = EXCP_BKPT;
>
> - /* Ensure PC is synchronised */
> + /* Ensure all state is synchronised */
> kvm_cpu_synchronize_state(cs);
Not sure the comment is providing any useful information now;
it probably should either be more explanatory or just deleted.
> switch (hsr_ec) {
> @@ -533,7 +535,14 @@ static int kvm_handle_debug(CPUState *cs, struct kvm_run *run)
> if (cs->singlestep_enabled) {
> return true;
> } else {
> - error_report("Came out of SINGLE STEP when not enabled");
> + /*
> + * The kernel should have supressed the guests ability to
"suppressed"; "guest's".
> + * single step at this point so something has gone wrong.
> + */
> + error_report("%s: guest single-step while debugging unsupported"
> + " (%"PRIx64", %"PRIx32")\n",
> + __func__, env->pc, arch_info->hsr);
> + return false;
> }
> break;
> case EC_AA64_BKPT:
> @@ -549,19 +558,24 @@ static int kvm_handle_debug(CPUState *cs, struct kvm_run *run)
> case EC_WATCHPOINT:
> if (kvm_arm_find_hw_watchpoint(cs, arch_info->far)) {
> return true;
> + } else {
> + forward_excp = EXCP_WAPT;
> }
> break;
> default:
> error_report("%s: unhandled debug exit (%"PRIx32", %"PRIx64")\n",
> __func__, arch_info->hsr, env->pc);
> + return false;
> }
>
> - /* If we don't handle this it could be it really is for the
> - guest to handle */
> - qemu_log_mask(LOG_UNIMP,
> - "%s: re-injecting exception not yet implemented"
> - " (0x%"PRIx32", %"PRIx64")\n",
> - __func__, hsr_ec, env->pc);
> + /* If we are not handling the debug exception it must belong to
> + * the guest. Let's re-use the existing TCG interrupt code to set
> + * everything up properly
> + */
> + cs->exception_index = forward_excp;
> + env->exception.syndrome = arch_info->hsr;
You need to do at least some manipulation of the HSR, surely?
For instance, the EC value for "watchpoint from lower exception
level" and "watchpoint from current exception level" are different,
so if this was a wp from EL1 then it'll be reported to KVM (at EL2)
as the former, but if we reflect it into the EL1 guest it should
become the latter.
> + env->exception.vaddress = arch_info->far;
Breakpoints and watchpoints need to set env->exception.fsr too.
You need to set env->exception.target_el as well (patches for
that have now hit master).
I also feel it would be better to set all of hsr/exception_index/
vaddress within the switch cases handling each type of exception,
possibly with a fallback for "generic something's wrong". I think
they turn out to be different enough to make it worth doing, and
it's easier to review the code and be clear that every case is
setting a coherent set of values.
> + cc->do_interrupt(cs);
>
> return false;
> }
> --
> 2.4.1
>
thanks
-- PMM
More information about the linux-arm-kernel
mailing list