[PATCH 3/7] arm64: dts: qcom: Add msm8916 sdhci configuration nodes
Ivan T. Ivanov
ivan.ivanov at linaro.org
Thu Jun 4 02:19:02 PDT 2015
From: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Add sdhci1 and sdhci2 device configuration nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Signed-off-by: Ivan T. Ivanov <ivan.ivanov at linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 34 +++++++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 6681c65..9ff0eb4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -24,7 +24,10 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases { };
+ aliases {
+ sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+ sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+ };
chosen { };
@@ -236,6 +239,35 @@
status = "disabled";
};
+ sdhc_1: sdhci at 07824000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci at 07864000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
intc: interrupt-controller at b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
1.9.1
More information about the linux-arm-kernel
mailing list