[PATCH] ARM: at91/dts: kizbox: fix mismatch LED PWM device

Nicolas Ferre nicolas.ferre at atmel.com
Thu Jun 4 01:02:41 PDT 2015


Le 03/06/2015 11:44, Gaël PORTAY a écrit :
> The network_red LED uses the 4th PWM device.
> 
> Signed-off-by: Gaël PORTAY <g.portay at overkiz.com>

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

And stacked on at91-4.2-dt.

Bye,

> ---
>  arch/arm/boot/dts/at91-kizbox.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
> index a0e63ff..cf1628f 100644
> --- a/arch/arm/boot/dts/at91-kizbox.dts
> +++ b/arch/arm/boot/dts/at91-kizbox.dts
> @@ -205,7 +205,7 @@
>  
>  		network_red {
>  			label = "pwm:red:network";
> -			pwms = <&tcb_pwm 3 10000000 PWM_POLARITY_INVERTED>;
> +			pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
>  			max-brightness = <255>;
>  			linux,default-trigger = "default-on";
>  		};
> 


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list