[PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock

[Vaibhav Hiremath]

To justify the need for hardware lock, lets take a real usecase scenario -
    
In case of Marvell SoC, PXA910 silicon, both AP and CP are present and
these two ARM cores are sharing one pair of I2C pins.
    
In order to keep I2C transaction operated with atomic, hardware lock
(RIPC) is required.
    
This patch extends support for atomic operation by adding hardware lock support
to the i2c-core.

PATCH[1/3] : Core changes for hardware lock
PATCH[2/3 & 3/3] : hardware lock support to i2c-pxa bus driver.

Link to previous post:
http://lkml.iu.edu/hypermail/linux/kernel/1104.3/02352.html
http://lkml.iu.edu/hypermail/linux/kernel/1104.3/02353.html
http://lkml.iu.edu/hypermail/linux/kernel/1104.3/02354.html

TODO:
  - DT node addition
    I am using PXA1928 based platform which is still not available
    in Mainline, so it is based on, below patch-series
    Link to Rob's patches:
     https://lkml.org/lkml/2015/5/1/14
     https://lkml.org/lkml/2015/5/19/1206
    PMIC 88pm860 support
     http://www.spinics.net/lists/arm-kernel/msg422554.html

Vaibhav Hiremath (3):
  i2c: core: append hardware lock with bus lock
  i2c: pxa: Add support for hardware lock
  i2c: pxa: Add pin ctrl support for CP core access

 drivers/i2c/busses/i2c-pxa.c | 92 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/i2c-core.c       | 22 +++++++++--
 include/linux/i2c.h          |  5 +++
 include/linux/i2c/pxa-i2c.h  |  4 ++
 4 files changed, 119 insertions(+), 4 deletions(-)

-- 
1.9.1