[PATCH v2] ARM: l2c: Add support for the "arm, shared-override" property

[Michal Simek]

On 05/15/2015 03:55 PM, Catalin Marinas wrote:
> On Fri, May 15, 2015 at 11:10:28AM +0100, Russell King - ARM Linux wrote:
>> On Thu, May 07, 2015 at 05:02:57PM +0100, Catalin Marinas wrote:
>>> On Thu, May 07, 2015 at 11:27:11AM +0200, Geert Uytterhoeven wrote:
>>>> diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
>>>> index 0dbabe9a6b0abb91..2484aed78c86546d 100644
>>>> --- a/Documentation/devicetree/bindings/arm/l2cc.txt
>>>> +++ b/Documentation/devicetree/bindings/arm/l2cc.txt
>>>> @@ -67,6 +67,12 @@ Optional properties:
>>>>    disable if zero.
>>>>  - arm,prefetch-offset : Override prefetch offset value. Valid values are
>>>>    0-7, 15, 23, and 31.
>>>> +- arm,shared-override : The default behavior of the pl310 cache controller with
>>>> +  respect to the shareable attribute is to transform "normal memory
>>>> +  non-cacheable transactions" into "cacheable no allocate" (for reads) or
>>>> +  "write through no write allocate" (for writes).
>>>> +  On systems where this may cause DMA buffer corruption, this property must be
>>>> +  specified to indicate that such transforms are precluded.
>>>>  
>>>>  Example:
>>>>  
>>>> diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
>>>> index e309c8f35af5af61..86d0e7461e5b0b18 100644
>>>> --- a/arch/arm/mm/cache-l2x0.c
>>>> +++ b/arch/arm/mm/cache-l2x0.c
>>>> @@ -1149,6 +1149,11 @@ static void __init l2c310_of_parse(const struct device_node *np,
>>>>  		}
>>>>  	}
>>>>  
>>>> +	if (of_property_read_bool(np, "arm,shared-override")) {
>>>> +		*aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
>>>> +		*aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
>>>> +	}
>>>> +
>>>>  	prefetch = l2x0_saved_regs.prefetch_ctrl;
>>>>  
>>>>  	ret = of_property_read_u32(np, "arm,double-linefill", &val);
>>>
>>> It looks fine to me.
>>>
>>> Acked-by: Catalin Marinas <catalin.marinas at arm.com>
>>>
>>> (even better if a subsequent patch adds this property to all the dts
>>> files containing "arm,pl310" ;))
>>
>> Even better would be for the boot loader/firmware to set the bit.
> 
> In an ideal world, I agree. But, arguably, we already set other bits in
> the PL310 AUXCTRL register (and related cache controllers, just look at
> the l2cc.txt bindings).
> 
> If you want to rely on firmware, can we at least check this bit and
> print a warning? Or go a step further and refuse to enable PL310 when
> this bit is clear? Otherwise coherent (non-cacheable) DMA operations are
> not safe.
> 

Any update on this one? I have the patch for Zynq pending and I want to
have any resolution on this in this generic way or simply by enabling it
via aux_mask as is here.
https://lkml.org/lkml/2015/5/12/51
This patch can be reverted when this generic solution reach mainline.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150602/4f0ac9e0/attachment.sig>