[PATCH 2/2] arm64: dts: mt8173: Add I2C device node

Matthias Brugger matthias.bgg at gmail.com
Mon Jun 1 05:25:41 PDT 2015


2015-06-01 8:29 GMT+02:00 Eddie Huang <eddie.huang at mediatek.com>:
> Add MT8173 I2C device nodes, include I2C controllers and pins.
> MT8173 has six I2C controllers, from i2c0 to i2c6, exclude i2c5.
> The 6th I2C controller register base doesn't next to 5th I2C,
> and there is a hardware between 5th and 6th I2C controller. So
> SoC designer name 6th controller as "i2c6", not "i2c5".
>
> Signed-off-by: Eddie Huang <eddie.huang at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi | 119 +++++++++++++++++++++++++++++++
>  1 file changed, 119 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index b52ec43..72d9ab1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -158,6 +158,53 @@
>                         interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
>                                                 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
>                                                 <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> +                       i2c0_pins_a: i2c0 at 0 {
> +                               pins1 {
> +                                       pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
> +                                                <MT8173_PIN_46_SCL0__FUNC_SCL0>;
> +                                       bias-disable;
> +                               };
> +                       };
> +
> +                       i2c1_pins_a: i2c1 at 0 {
> +                               pins1 {
> +                                       pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>,
> +                                                <MT8173_PIN_126_SCL1__FUNC_SCL1>;
> +                                       bias-disable;
> +                               };
> +                       };
> +
> +                       i2c2_pins_a: i2c2 at 0 {
> +                               pins1 {
> +                                       pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>,
> +                                                <MT8173_PIN_44_SCL2__FUNC_SCL2>;
> +                                       bias-disable;
> +                               };
> +                       };
> +
> +                       i2c3_pins_a: i2c3 at 0 {
> +                               pins1 {
> +                                       pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>,
> +                                                <MT8173_PIN_107_SCL3__FUNC_SCL3>;
> +                                       bias-disable;
> +                               };
> +                       };
> +
> +                       i2c4_pins_a: i2c4 at 0 {
> +                               pins1 {
> +                                       pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>,
> +                                                <MT8173_PIN_134_SCL4__FUNC_SCL4>;
> +                                       bias-disable;
> +                               };
> +                       };
> +
> +                       i2c6_pins_a: i2c6 at 0 {
> +                               pins1 {
> +                                       pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>,
> +                                                <MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>;
> +                                       bias-disable;
> +                               };
> +                       };
>                 };
>
>                 watchdog: watchdog at 10007000 {
> @@ -194,6 +241,78 @@
>                                 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>                 };
>
> +               i2c0: i2c at 11007000 {
> +                       compatible = "mediatek,mt8173-i2c";
> +                       reg = <0 0x11007000 0 0x70>,
> +                             <0 0x11000100 0 0x80>;
> +                       interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
> +                       clock-div = <16>;
> +                       clocks = <&pericfg CLK_PERI_I2C0>,
> +                                <&pericfg CLK_PERI_AP_DMA>;
> +                       clock-names = "main", "dma";
> +                       status = "disabled";

Please order nodes by their register address.

Thanks,
Matthias



More information about the linux-arm-kernel mailing list