[PATCH v5 10/12] KVM: arm64: guest debug, HW assisted debug support

[Will Deacon]

Hi Alex,

On Fri, May 29, 2015 at 10:30:26AM +0100, Alex Bennée wrote:
> This adds support for userspace to control the HW debug registers for
> guest debug. In the debug ioctl we copy the IMPDEF defined number of
> registers into a new register set called host_debug_state. There is now
> a new vcpu parameter called debug_ptr which selects which register set
> is to copied into the real registers when world switch occurs.
> 
> I've moved some helper functions into the hw_breakpoint.h header for
> re-use.
> 
> As with single step we need to tweak the guest registers to enable the
> exceptions so we need to save and restore those bits.
> 
> Two new capabilities have been added to the KVM_EXTENSION ioctl to allow
> userspace to query the number of hardware break and watch points
> available on the host hardware.
> 
> Signed-off-by: Alex Bennée <alex.bennee at linaro.org>

[...]

> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 33c8143..ada57df 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -2668,7 +2668,7 @@ The top 16 bits of the control field are architecture specific control
>  flags which can include the following:
>  
>    - KVM_GUESTDBG_USE_SW_BP:     using software breakpoints [x86, arm64]
> -  - KVM_GUESTDBG_USE_HW_BP:     using hardware breakpoints [x86, s390]
> +  - KVM_GUESTDBG_USE_HW_BP:     using hardware breakpoints [x86, s390, arm64]
>    - KVM_GUESTDBG_INJECT_DB:     inject DB type exception [x86]
>    - KVM_GUESTDBG_INJECT_BP:     inject BP type exception [x86]
>    - KVM_GUESTDBG_EXIT_PENDING:  trigger an immediate guest exit [s390]
> @@ -2683,6 +2683,11 @@ updated to the correct (supplied) values.
>  The second part of the structure is architecture specific and
>  typically contains a set of debug registers.
>  
> +For arm64 the number of debug registers is implementation defined and
> +can be determined by querying the KVM_CAP_GUEST_DEBUG_HW_BPS and
> +KVM_CAP_GUEST_DEBUG_HW_WPS capabilities which return a positive number
> +indicating the number of supported registers.
> +
>  When debug events exit the main run loop with the reason
>  KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run
>  structure containing architecture specific debug information.
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 0d17c7b..6df47c1 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -307,6 +307,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
>  
>  #define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE |    \
>  			    KVM_GUESTDBG_USE_SW_BP | \
> +			    KVM_GUESTDBG_USE_HW_BP | \
>  			    KVM_GUESTDBG_SINGLESTEP)
>  
>  /**
> @@ -327,6 +328,12 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
>  
>  	if (dbg->control & KVM_GUESTDBG_ENABLE) {
>  		vcpu->guest_debug = dbg->control;
> +
> +		/* Hardware assisted Break and Watch points */
> +		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
> +			vcpu->arch.external_debug_state = dbg->arch;
> +		}
> +
>  	} else {
>  		/* If not enabled clear all flags */
>  		vcpu->guest_debug = 0;
> diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
> index 52b484b..c450552 100644
> --- a/arch/arm64/include/asm/hw_breakpoint.h
> +++ b/arch/arm64/include/asm/hw_breakpoint.h
> @@ -130,6 +130,18 @@ static inline void ptrace_hw_copy_thread(struct task_struct *task)
>  }
>  #endif
>  
> +/* Determine number of BRP registers available. */
> +static inline int get_num_brps(void)
> +{
> +	return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
> +}
> +
> +/* Determine number of WRP registers available. */
> +static inline int get_num_wrps(void)
> +{
> +	return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
> +}

I'm fine with moving these into the header file, but we should probably
revisit this at some point so that we use a shadow value to indicate the
minimum number of registers across the system for e.g. big.LITTLE platforms
that don't have uniform debug resources.

>  extern struct pmu perf_ops_bp;
>  
>  #endif	/* __KERNEL__ */
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index e5040b6..498d4f7 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -113,12 +113,13 @@ struct kvm_vcpu_arch {
>  
>  	/*
>  	 * For debugging the guest we need to keep a set of debug
> -	 * registers which can override the guests own debug state
> +	 * registers which can override the guest's own debug state
>  	 * while being used. These are set via the KVM_SET_GUEST_DEBUG
>  	 * ioctl.
>  	 */
>  	struct kvm_guest_debug_arch *debug_ptr;
>  	struct kvm_guest_debug_arch vcpu_debug_state;
> +	struct kvm_guest_debug_arch external_debug_state;
>  
>  	/* Pointer to host CPU context */
>  	kvm_cpu_context_t *host_cpu_context;
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index 43758e7..95168c2 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -116,7 +116,7 @@ struct kvm_guest_debug_arch {
>  
>  struct kvm_debug_exit_arch {
>  	__u32 hsr;
> -	__u64 far;
> +	__u64 far;	/* used for watchpoints */

Why not just add the comment with the field in your earlier patch?

Will