[PATCH 00/11] ARM: OMAP3: legacy clock data move under clk driver

[Mike Turquette]

Quoting Tero Kristo (2015-01-30 07:20:36)
> On 01/30/2015 02:42 AM, Mike Turquette wrote:
> > Quoting Tero Kristo (2015-01-29 12:19:29)
> >> On 01/08/2015 01:00 AM, Tony Lindgren wrote:
> >>> * Tero Kristo <t-kristo at ti.com> [141216 08:22]:
> >>>> Hi,
> >>>>
> >>>> These patches move the legacy clock data for omap3 under drivers/clk/ti.
> >>>> After these patches are applied, it should be possible to get rid of
> >>>> clk-private.h (long pending project for Mike.)
> >>>>
> >>>> Testing done (on top of 3.18-rc1):
> >>>>
> >>>> omap3-beagle: boot / suspend-resume (ret/off) / cpuidle (ret/off)
> >>>> omap3-beagle-xm: boot upto fs mount (see note below)
> >>>> sdp3430: boot
> >>>> n900: boot
> >>>>
> >>>> Note: beagle-xm failed with FS mount on the board I have access to, but
> >>>>         this happens with clean 3.18-rc1 and linux-next also at the moment.
> >>>>         The board has probably corrupted filesystem image but I am unable
> >>>>         to fix this atm (remote board.)
> >>>>
> >>>> Test branch:
> >>>> tree: https://github.com/t-kristo/linux-pm.git
> >>>> branch: 3.18-rc1-omap3-clk-rework
> >>>
> >>> Great, hopefully this will finally allow Mike to make the
> >>> generic struct clk private to drivers/clk :)
> >>>
> >>> Seems to boot just fine based on a quick legacy booting test
> >>> on n900.
> >>>
> >>> Mike, assuming no other issues, can you please apply these into a
> >>> immutable branch against v3.19-rc1 that Paul and I can also merge
> >>> in as needed?
> >>>
> >>> Please also feel free to add:
> >>>
> >>> Acked-by: Tony Lindgren <tony at atomide.com>
> >>>
> >>
> >> I just rebased these patches on top of 3.19-rc1, and noticed a problem
> >> with dpll5 on beagle-xm (basically a divide-by-zero error + locking
> >> issue during boot.) The extra diff at the end of this email fixes the
> >> problems, I will also send the updated two patches as v2. Updated branch
> >> available in my tree under name 3.19-rc1-omap3-clk-rework.
> >
> > I've applied these 11 patches on top of v3.19-rc1, including the two V2
> > patches for #6 and #8 to the clk-omap-legacy branch here:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-omap-legacy
> >
> > Let me know if I screwed anything up. I've merged this immutable branch
> > into clk-next.
> >
> > In addition I've made some changes to remove clk-private.h permanently.
> > I'll post those later today. Again, please let me know if I screwed
> > anything up.
> 
> I can't see the clk-omap-legacy merged to clk-next so far, maybe you did 
> not push it yet? The branch itself is identical copy of mine, so can't 
> see any issues there so far.

That is correct. There are a lot of unrelated changes in clk-next right
now so I didn't push this OMAP stuff last night. Turns out to be a good
thing since linux-next had some breakage today. Once that is resolved
I'll push this out, but clk-omap-legacy IS merged locally in my tree,
just not on the public git that linux-next pulls.

Regards,
Mike

> 
> -Tero
> 
> >
> > Regards,
> > Mike
> >
> >>
> >> - Tero
> >>
> >> ---------------------
> >>
> >> diff --git a/drivers/clk/ti/clk-3xxx-legacy.c
> >> b/drivers/clk/ti/clk-3xxx-legacy.c
> >> index 81ad510..e0732a4 100644
> >> --- a/drivers/clk/ti/clk-3xxx-legacy.c
> >> +++ b/drivers/clk/ti/clk-3xxx-legacy.c
> >> @@ -136,6 +136,7 @@ static struct ti_clk_dpll dpll3_ck_data = {
> >>          .idlest_mask = 0x1,
> >>          .auto_recal_bit = 0x3,
> >>          .max_divider = 0x80,
> >> +       .min_divider = 0x1,
> >>          .recal_en_bit = 0x5,
> >>          .max_multiplier = 0x7ff,
> >>          .enable_mask = 0x7,
> >> @@ -307,6 +308,7 @@ static struct ti_clk_dpll dpll4_ck_data = {
> >>          .idlest_mask = 0x2,
> >>          .auto_recal_bit = 0x13,
> >>          .max_divider = 0x80,
> >> +       .min_divider = 0x1,
> >>          .recal_en_bit = 0x6,
> >>          .max_multiplier = 0x7ff,
> >>          .enable_mask = 0x70000,
> >> @@ -507,6 +509,7 @@ static struct ti_clk_dpll dpll5_ck_data = {
> >>          .idlest_mask = 0x1,
> >>          .auto_recal_bit = 0x3,
> >>          .max_divider = 0x80,
> >> +       .min_divider = 0x1,
> >>          .recal_en_bit = 0x19,
> >>          .max_multiplier = 0x7ff,
> >>          .enable_mask = 0x7,
> >> @@ -1271,6 +1274,7 @@ static struct ti_clk_dpll dpll1_ck_data = {
> >>          .idlest_mask = 0x1,
> >>          .auto_recal_bit = 0x3,
> >>          .max_divider = 0x80,
> >> +       .min_divider = 0x1,
> >>          .recal_en_bit = 0x7,
> >>          .max_multiplier = 0x7ff,
> >>          .enable_mask = 0x7,
> >> @@ -2154,6 +2158,7 @@ static struct ti_clk_dpll dpll2_ck_data = {
> >>          .idlest_mask = 0x1,
> >>          .auto_recal_bit = 0x3,
> >>          .max_divider = 0x80,
> >> +       .min_divider = 0x1,
> >>          .recal_en_bit = 0x8,
> >>          .max_multiplier = 0x7ff,
> >>          .enable_mask = 0x7,
> >> @@ -2513,6 +2518,7 @@ static struct ti_clk_dpll dpll4_ck_omap36xx_data = {
> >>          .idlest_mask = 0x2,
> >>          .auto_recal_bit = 0x13,
> >>          .max_divider = 0x80,
> >> +       .min_divider = 0x1,
> >>          .recal_en_bit = 0x6,
> >>          .max_multiplier = 0xfff,
> >>          .enable_mask = 0x70000,
> >> diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
> >> index 8d9c603..404158d 100644
> >> --- a/drivers/clk/ti/clock.h
> >> +++ b/drivers/clk/ti/clock.h
> >> @@ -148,6 +148,7 @@ struct ti_clk_dpll {
> >>          u32 sddiv_mask;
> >>          u16 max_multiplier;
> >>          u16 max_divider;
> >> +       u8 min_divider;
> >>          u8 auto_recal_bit;
> >>          u8 recal_en_bit;
> >>          u8 recal_st_bit;
> >> diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
> >> index 7d67639..47ebff7 100644
> >> --- a/drivers/clk/ti/dpll.c
> >> +++ b/drivers/clk/ti/dpll.c
> >> @@ -243,6 +243,7 @@ struct clk *ti_clk_register_dpll(struct ti_clk *setup)
> >>          dd->sddiv_mask = dpll->sddiv_mask;
> >>          dd->dco_mask = dpll->dco_mask;
> >>          dd->max_divider = dpll->max_divider;
> >> +       dd->min_divider = dpll->min_divider;
> >>          dd->max_multiplier = dpll->max_multiplier;
> >>          dd->auto_recal_bit = dpll->auto_recal_bit;
> >>          dd->recal_en_bit = dpll->recal_en_bit;
> >>
>