[PATCH 00/11] ARM: OMAP3: legacy clock data move under clk driver
Mike Turquette
mturquette at linaro.org
Thu Jan 29 16:42:24 PST 2015
Quoting Tero Kristo (2015-01-29 12:19:29)
> On 01/08/2015 01:00 AM, Tony Lindgren wrote:
> > * Tero Kristo <t-kristo at ti.com> [141216 08:22]:
> >> Hi,
> >>
> >> These patches move the legacy clock data for omap3 under drivers/clk/ti.
> >> After these patches are applied, it should be possible to get rid of
> >> clk-private.h (long pending project for Mike.)
> >>
> >> Testing done (on top of 3.18-rc1):
> >>
> >> omap3-beagle: boot / suspend-resume (ret/off) / cpuidle (ret/off)
> >> omap3-beagle-xm: boot upto fs mount (see note below)
> >> sdp3430: boot
> >> n900: boot
> >>
> >> Note: beagle-xm failed with FS mount on the board I have access to, but
> >> this happens with clean 3.18-rc1 and linux-next also at the moment.
> >> The board has probably corrupted filesystem image but I am unable
> >> to fix this atm (remote board.)
> >>
> >> Test branch:
> >> tree: https://github.com/t-kristo/linux-pm.git
> >> branch: 3.18-rc1-omap3-clk-rework
> >
> > Great, hopefully this will finally allow Mike to make the
> > generic struct clk private to drivers/clk :)
> >
> > Seems to boot just fine based on a quick legacy booting test
> > on n900.
> >
> > Mike, assuming no other issues, can you please apply these into a
> > immutable branch against v3.19-rc1 that Paul and I can also merge
> > in as needed?
> >
> > Please also feel free to add:
> >
> > Acked-by: Tony Lindgren <tony at atomide.com>
> >
>
> I just rebased these patches on top of 3.19-rc1, and noticed a problem
> with dpll5 on beagle-xm (basically a divide-by-zero error + locking
> issue during boot.) The extra diff at the end of this email fixes the
> problems, I will also send the updated two patches as v2. Updated branch
> available in my tree under name 3.19-rc1-omap3-clk-rework.
I've applied these 11 patches on top of v3.19-rc1, including the two V2
patches for #6 and #8 to the clk-omap-legacy branch here:
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-omap-legacy
Let me know if I screwed anything up. I've merged this immutable branch
into clk-next.
In addition I've made some changes to remove clk-private.h permanently.
I'll post those later today. Again, please let me know if I screwed
anything up.
Regards,
Mike
>
> - Tero
>
> ---------------------
>
> diff --git a/drivers/clk/ti/clk-3xxx-legacy.c
> b/drivers/clk/ti/clk-3xxx-legacy.c
> index 81ad510..e0732a4 100644
> --- a/drivers/clk/ti/clk-3xxx-legacy.c
> +++ b/drivers/clk/ti/clk-3xxx-legacy.c
> @@ -136,6 +136,7 @@ static struct ti_clk_dpll dpll3_ck_data = {
> .idlest_mask = 0x1,
> .auto_recal_bit = 0x3,
> .max_divider = 0x80,
> + .min_divider = 0x1,
> .recal_en_bit = 0x5,
> .max_multiplier = 0x7ff,
> .enable_mask = 0x7,
> @@ -307,6 +308,7 @@ static struct ti_clk_dpll dpll4_ck_data = {
> .idlest_mask = 0x2,
> .auto_recal_bit = 0x13,
> .max_divider = 0x80,
> + .min_divider = 0x1,
> .recal_en_bit = 0x6,
> .max_multiplier = 0x7ff,
> .enable_mask = 0x70000,
> @@ -507,6 +509,7 @@ static struct ti_clk_dpll dpll5_ck_data = {
> .idlest_mask = 0x1,
> .auto_recal_bit = 0x3,
> .max_divider = 0x80,
> + .min_divider = 0x1,
> .recal_en_bit = 0x19,
> .max_multiplier = 0x7ff,
> .enable_mask = 0x7,
> @@ -1271,6 +1274,7 @@ static struct ti_clk_dpll dpll1_ck_data = {
> .idlest_mask = 0x1,
> .auto_recal_bit = 0x3,
> .max_divider = 0x80,
> + .min_divider = 0x1,
> .recal_en_bit = 0x7,
> .max_multiplier = 0x7ff,
> .enable_mask = 0x7,
> @@ -2154,6 +2158,7 @@ static struct ti_clk_dpll dpll2_ck_data = {
> .idlest_mask = 0x1,
> .auto_recal_bit = 0x3,
> .max_divider = 0x80,
> + .min_divider = 0x1,
> .recal_en_bit = 0x8,
> .max_multiplier = 0x7ff,
> .enable_mask = 0x7,
> @@ -2513,6 +2518,7 @@ static struct ti_clk_dpll dpll4_ck_omap36xx_data = {
> .idlest_mask = 0x2,
> .auto_recal_bit = 0x13,
> .max_divider = 0x80,
> + .min_divider = 0x1,
> .recal_en_bit = 0x6,
> .max_multiplier = 0xfff,
> .enable_mask = 0x70000,
> diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
> index 8d9c603..404158d 100644
> --- a/drivers/clk/ti/clock.h
> +++ b/drivers/clk/ti/clock.h
> @@ -148,6 +148,7 @@ struct ti_clk_dpll {
> u32 sddiv_mask;
> u16 max_multiplier;
> u16 max_divider;
> + u8 min_divider;
> u8 auto_recal_bit;
> u8 recal_en_bit;
> u8 recal_st_bit;
> diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
> index 7d67639..47ebff7 100644
> --- a/drivers/clk/ti/dpll.c
> +++ b/drivers/clk/ti/dpll.c
> @@ -243,6 +243,7 @@ struct clk *ti_clk_register_dpll(struct ti_clk *setup)
> dd->sddiv_mask = dpll->sddiv_mask;
> dd->dco_mask = dpll->dco_mask;
> dd->max_divider = dpll->max_divider;
> + dd->min_divider = dpll->min_divider;
> dd->max_multiplier = dpll->max_multiplier;
> dd->auto_recal_bit = dpll->auto_recal_bit;
> dd->recal_en_bit = dpll->recal_en_bit;
>
More information about the linux-arm-kernel
mailing list