[PATCH 2/2] ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
Heiko Stübner
heiko at sntech.de
Thu Jan 29 15:43:11 PST 2015
Currently the hdmi driver is using one of the soc i2c busses for ddc probing
and while documentation always specifies i2c5 as hdmi-i2c it could very well
be any other bus as well.
Therefore this is a property of the board and should be specified there.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/boot/dts/rk3288-evb.dtsi | 1 +
arch/arm/boot/dts/rk3288-firefly.dtsi | 1 +
arch/arm/boot/dts/rk3288.dtsi | 1 -
3 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 6857730..86ede58 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -105,6 +105,7 @@
};
&hdmi {
+ ddc-i2c-bus = <&i2c5>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 6dcc5e9..e6f873a 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -180,6 +180,7 @@
};
&hdmi {
+ ddc-i2c-bus = <&i2c5>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 1e75a0f..1141850 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -646,7 +646,6 @@
compatible = "rockchip,rk3288-dw-hdmi";
reg = <0xff980000 0x20000>;
reg-io-width = <4>;
- ddc-i2c-bus = <&i2c5>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
--
2.1.1
More information about the linux-arm-kernel
mailing list