[PATCH] arm64: Avoid breakage caused by .altmacro in fpsimd save/restore macros
Ard Biesheuvel
ard.biesheuvel at linaro.org
Thu Jan 29 08:34:05 PST 2015
On 29 January 2015 at 16:24, Dave Martin <Dave.Martin at arm.com> wrote:
> Alternate macro mode is not a property of a macro definition, but a
> gas runtime state that alters the way macros are expanded for ever
> after (until .noaltmacro is seen).
>
> This means that subsequent assembly code that calls other macros can
> break if fpsimdmacros.h is included.
>
> Since these instruction sequences are simple (if dull -- but in a
> good way), this patch solves the problem by simply expanding the
> .irp loops. The pre-existing fpsimd_{save,restore} macros weren't
> rolled with .irp anyway and the sequences affected are short, so
> this change restores consistency at little cost.
>
> Signed-off-by: Dave Martin <Dave.Martin at arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> ---
> arch/arm64/include/asm/fpsimdmacros.h | 43 ++++++++++++++++++++++++---------
> 1 file changed, 32 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
> index 007618b..a2daf12 100644
> --- a/arch/arm64/include/asm/fpsimdmacros.h
> +++ b/arch/arm64/include/asm/fpsimdmacros.h
> @@ -76,7 +76,6 @@
> fpsimd_restore_fpcr x\tmpnr, \state
> .endm
>
> -.altmacro
> .macro fpsimd_save_partial state, numnr, tmpnr1, tmpnr2
> mrs x\tmpnr1, fpsr
> str w\numnr, [\state, #8]
> @@ -86,11 +85,22 @@
> add \state, \state, x\numnr, lsl #4
> sub x\tmpnr1, x\tmpnr1, x\numnr, lsl #1
> br x\tmpnr1
> - .irp qa, 30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10, 8, 6, 4, 2, 0
> - .irp qb, %(qa + 1)
> - stp q\qa, q\qb, [\state, # -16 * \qa - 16]
> - .endr
> - .endr
> + stp q30, q31, [\state, #-16 * 30 - 16]
> + stp q28, q29, [\state, #-16 * 28 - 16]
> + stp q26, q27, [\state, #-16 * 26 - 16]
> + stp q24, q25, [\state, #-16 * 24 - 16]
> + stp q22, q23, [\state, #-16 * 22 - 16]
> + stp q20, q21, [\state, #-16 * 20 - 16]
> + stp q18, q19, [\state, #-16 * 18 - 16]
> + stp q16, q17, [\state, #-16 * 16 - 16]
> + stp q14, q15, [\state, #-16 * 14 - 16]
> + stp q12, q13, [\state, #-16 * 12 - 16]
> + stp q10, q11, [\state, #-16 * 10 - 16]
> + stp q8, q9, [\state, #-16 * 8 - 16]
> + stp q6, q7, [\state, #-16 * 6 - 16]
> + stp q4, q5, [\state, #-16 * 4 - 16]
> + stp q2, q3, [\state, #-16 * 2 - 16]
> + stp q0, q1, [\state, #-16 * 0 - 16]
> 0:
> .endm
>
> @@ -103,10 +113,21 @@
> add \state, \state, x\tmpnr2, lsl #4
> sub x\tmpnr1, x\tmpnr1, x\tmpnr2, lsl #1
> br x\tmpnr1
> - .irp qa, 30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10, 8, 6, 4, 2, 0
> - .irp qb, %(qa + 1)
> - ldp q\qa, q\qb, [\state, # -16 * \qa - 16]
> - .endr
> - .endr
> + ldp q30, q31, [\state, #-16 * 30 - 16]
> + ldp q28, q29, [\state, #-16 * 28 - 16]
> + ldp q26, q27, [\state, #-16 * 26 - 16]
> + ldp q24, q25, [\state, #-16 * 24 - 16]
> + ldp q22, q23, [\state, #-16 * 22 - 16]
> + ldp q20, q21, [\state, #-16 * 20 - 16]
> + ldp q18, q19, [\state, #-16 * 18 - 16]
> + ldp q16, q17, [\state, #-16 * 16 - 16]
> + ldp q14, q15, [\state, #-16 * 14 - 16]
> + ldp q12, q13, [\state, #-16 * 12 - 16]
> + ldp q10, q11, [\state, #-16 * 10 - 16]
> + ldp q8, q9, [\state, #-16 * 8 - 16]
> + ldp q6, q7, [\state, #-16 * 6 - 16]
> + ldp q4, q5, [\state, #-16 * 4 - 16]
> + ldp q2, q3, [\state, #-16 * 2 - 16]
> + ldp q0, q1, [\state, #-16 * 0 - 16]
> 0:
> .endm
> --
> 1.7.10.4
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list