[PATCH] spi/xilinx: Cast ioread32/iowrite32 function pointers

[Ricardo Ribalda Delgado]

IO functions prototypes may have different argument qualifiers
on different architectures.

This patch cast the assignment of the function, to match the one defined
at iomap.h.

Fixes: 99082eab63449f9d spi/xilinx: Remove iowrite/ioread wrappers
Reported-by: kbuild test robot <fengguang.wu at intel.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda at gmail.com>
---
 drivers/spi/spi-xilinx.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 0e8962c..418e730 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -91,7 +91,7 @@ struct xilinx_spi {
 	u8 bytes_per_word;
 	int buffer_size;	/* buffer size in words */
 	u32 cs_inactive;	/* Level of the CS pins when inactive*/
-	unsigned int (*read_fn)(void __iomem *);
+	u32 (*read_fn)(void __iomem *);
 	void (*write_fn)(u32, void __iomem *);
 };
 
@@ -378,15 +378,15 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 	 * Setup little endian helper functions first and try to use them
 	 * and check if bit was correctly setup or not.
 	 */
-	xspi->read_fn = ioread32;
-	xspi->write_fn = iowrite32;
+	xspi->read_fn = (u32 (*)(void __iomem *)) ioread32;
+	xspi->write_fn = (void (*)(u32, void __iomem *)) iowrite32;
 
 	xspi->write_fn(XSPI_CR_LOOP, xspi->regs + XSPI_CR_OFFSET);
 	tmp = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
 	tmp &= XSPI_CR_LOOP;
 	if (tmp != XSPI_CR_LOOP) {
-		xspi->read_fn = ioread32be;
-		xspi->write_fn = iowrite32be;
+		xspi->read_fn = (u32 (*)(void __iomem *)) ioread32be;
+		xspi->write_fn = (void (*)(u32, void __iomem *)) iowrite32be;
 	}
 
 	master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
-- 
2.1.4