[PATCH v5 00/13] AT91 pm cleanup for 3.20

[Nicolas Ferre]

Le 29/01/2015 07:35, Wenyou Yang a écrit :
> Hi Nicolas,
> 
> This version is rebased on the branch: at91-3.20-cleanup of the repository
> 	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
> 
> It is purpose to clean up the PM code, includes the patches from Peter Rosin and Sylvain Rochet.
> 
> Since verifying the USB clock and USB PLL disabling before suspending to memory,
> it aslo depends on the following patch serials from Sylvain:
> 	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
> 	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements
> 
> Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
> The suspend to standby mode uses the same sram function as the suspend to memory mode.
> Remove some unused code.
> 
> Alexandr & Sylvain, Thank you very much for so many feedbacks.

Wenyou,

I'm sorry but the PM "cleanup" and "improvement" series won't be merged
for 3.20 (so you can remove this from the series subject). The series
are pretty big, address a sensitive aspect of the chips and are not
completely ready. So I propose to slow down the pace of versions and
focus on these two objectives:

1/ try to extract a handful of patches that could be sent as "fixes" for
3.20 (no more than 5-6 patches). If they are enough urgent, I can try to
add them to an early "fixes" branch during the 3.20 stabilization process.

2/ try to figure out if from this big amount of assembly code can't be
extracted some parts that can be converted to C or parts that can use
ARM common code (for cache management for instance).

During 3.21 development phase, we will come back to the "cleanup" series
and prepare something that can host the sama5 PM support. Finally we
will add sama5d3/sama5d4 PM enhancements.


> Changes in v5:
>  - Rebase the branch: at91-3.20-cleanup HEAD:fa9df37
> 
> Changes in v4:
>  - Clear unused state argument in at91_pm_verify_clocks()
>  - Remove pr_info("AT91:... slow_clock ? ..") in patch 07/13.
> 
> Changes in v3
>  - Sylvain splits the patch in two
>  - Add handling if no sram allocated for PM
>  - Retain the STANDBY and SUSPEND_MEM select in at91_pm_enter.
> 
> Changes in v2:
>  - Rebase on the at91-3.20-cleanup branch
>  - Recover the verify clock condition, only for suspend to memory.
>  - Collect ACK from Alexandre
>  - Add the macro for PM mode
> 
> Peter Rosin (1):
>   pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
> 
> Sylvain Rochet (2):
>   pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
>   pm: at91: pm_slowclock: remove clocks which are already stopped when
>     entering slow clock mode
> 
> Wenyou Yang (10):
>   pm: at91: pm_slowclock: remove the unused code related with
>     SLOWDOWN_MASTER_CLOCK
>   pm: at91: move the copying the sram function to the sram
>     initializationi phase
>   ARM: at91: move select SRAM to ARCH_AT91
>   pm: at91: remove the config item CONFIG_AT91_SLOW_CLOCK
>   pm: at91: the standby mode uses the same sram function as the suspend
>     to memory mode
>   pm: at91: rename file name: pm_slowclock.S -->pm_suspend.S
>   pm: at91: rename function name:
>     at91_slow_clock()-->at91_pm_suspend_sram_fn
>   pm: at91: remove the at91_xxx_standby() function definitions in the
>     pm.h
>   pm: at91: remove the data member at91_xxx_standby() of struct
>     ramc_ids
>   pm: at91: amend the pm_suspend entry for at91_cpuidle_device
> 
>  arch/arm/mach-at91/Kconfig         |   17 +-
>  arch/arm/mach-at91/Makefile        |    2 +-
>  arch/arm/mach-at91/pm.c            |  166 +++++++++---------
>  arch/arm/mach-at91/pm.h            |  100 +----------
>  arch/arm/mach-at91/pm_slowclock.S  |  323 ------------------------------------
>  arch/arm/mach-at91/pm_suspend.S    |  277 +++++++++++++++++++++++++++++++
>  include/soc/at91/at91sam9_ddrsdr.h |    2 +-
>  7 files changed, 366 insertions(+), 521 deletions(-)
>  delete mode 100644 arch/arm/mach-at91/pm_slowclock.S
>  create mode 100644 arch/arm/mach-at91/pm_suspend.S
> 


-- 
Nicolas Ferre