[PATCH v3 05/10] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi

[Chen-Yu Tsai]

On sun9i, there are 3 independent usb phys for EHCI/OHCI.
Add device nodes for them.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 679cf2878800..d7ebd9390b01 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -355,6 +355,43 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		usbphy1: phy at 00a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_phy_clk 1>;
+			clock-names = "phy";
+			resets = <&usb_phy_clk 17>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usbphy2: phy at 00a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 3>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		usbphy3: phy at 00a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 5>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		mmc0: mmc at 01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.1.4