[PATCH 5/7] ARM: at91: change board files into SoC files
Nicolas Ferre
nicolas.ferre at atmel.com
Tue Jan 27 10:07:24 PST 2015
As board files are now DT only and can address all aspects of the SoC family,
we can rename them so that the mach-at91 directory looks cleaner.
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
arch/arm/mach-at91/Makefile | 11 ++---
arch/arm/mach-at91/at91rm9200.c | 68 ++++++++++++++++++++++++++
arch/arm/mach-at91/at91sam9.c | 90 ++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/board-dt-rm9200.c | 68 --------------------------
arch/arm/mach-at91/board-dt-sam9.c | 90 ----------------------------------
arch/arm/mach-at91/board-dt-sama5.c | 95 ------------------------------------
arch/arm/mach-at91/sama5.c | 95 ++++++++++++++++++++++++++++++++++++
7 files changed, 256 insertions(+), 261 deletions(-)
create mode 100644 arch/arm/mach-at91/at91rm9200.c
create mode 100644 arch/arm/mach-at91/at91sam9.c
delete mode 100644 arch/arm/mach-at91/board-dt-rm9200.c
delete mode 100644 arch/arm/mach-at91/board-dt-sam9.c
delete mode 100644 arch/arm/mach-at91/board-dt-sama5.c
create mode 100644 arch/arm/mach-at91/sama5.c
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 3362f51ffd82..827fdbcce1c7 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -7,14 +7,9 @@ obj-y := setup.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support
-obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200_time.o
-
-# AT91SAM board with device-tree
-obj-$(CONFIG_SOC_AT91RM9200) += board-dt-rm9200.o
-obj-$(CONFIG_SOC_AT91SAM9) += board-dt-sam9.o
-
-# SAMA5 board with device-tree
-obj-$(CONFIG_SOC_SAMA5) += board-dt-sama5.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
+obj-$(CONFIG_SOC_SAMA5) += sama5.o
# Power Management
obj-$(CONFIG_PM) += pm.o
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
new file mode 100644
index 000000000000..ec89806c9d5d
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -0,0 +1,68 @@
+/*
+ * Setup code for AT91RM9200
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre at atmel.com>
+ * 2012 Joachim Eastwood <manabian at gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/system_misc.h>
+
+#include <mach/at91_st.h>
+
+#include "generic.h"
+
+static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+ /*
+ * Perform a hardware reset with the use of the Watchdog timer.
+ */
+ at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+ at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+}
+
+static void __init at91rm9200_dt_timer_init(void)
+{
+ of_clk_init(NULL);
+ at91rm9200_timer_init();
+}
+
+static void __init rm9200_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ arm_pm_idle = at91rm9200_idle;
+ arm_pm_restart = at91rm9200_restart;
+ at91_rm9200_pm_init();
+}
+
+
+
+static const char *at91rm9200_dt_board_compat[] __initconst = {
+ "atmel,at91rm9200",
+ NULL
+};
+
+DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
+ .init_time = at91rm9200_dt_timer_init,
+ .map_io = at91_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = rm9200_dt_device_init,
+ .dt_compat = at91rm9200_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
new file mode 100644
index 000000000000..04a9af79aadb
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -0,0 +1,90 @@
+/*
+ * Setup code for AT91SAM9
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre at atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+
+#include <asm/system_misc.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+
+static void __init sam9_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ arm_pm_idle = at91sam9_idle;
+ at91_sam9260_pm_init();
+}
+
+static const char *at91_dt_board_compat[] __initconst = {
+ "atmel,at91sam9",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
+ /* Maintainer: Atmel */
+ .map_io = at91_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = sam9_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END
+
+static void __init sam9g45_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ arm_pm_idle = at91sam9_idle;
+ at91_sam9g45_pm_init();
+}
+
+static const char *at91_9g45_board_compat[] __initconst = {
+ "atmel,at91sam9g45",
+ NULL
+};
+
+DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
+ /* Maintainer: Atmel */
+ .map_io = at91_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = sam9g45_dt_device_init,
+ .dt_compat = at91_9g45_board_compat,
+MACHINE_END
+
+static void __init sam9x5_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ arm_pm_idle = at91sam9_idle;
+ at91_sam9x5_pm_init();
+}
+
+static const char *at91_9x5_board_compat[] __initconst = {
+ "atmel,at91sam9x5",
+ "atmel,at91sam9n12",
+ NULL
+};
+
+DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
+ /* Maintainer: Atmel */
+ .map_io = at91_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = sam9x5_dt_device_init,
+ .dt_compat = at91_9x5_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
deleted file mode 100644
index 5fcd1c73ece0..000000000000
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Setup code for AT91RM9200 Evaluation Kits with Device Tree support
- *
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre at atmel.com>
- * 2012 Joachim Eastwood <manabian at gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/at91_st.h>
-
-#include "generic.h"
-
-static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
-{
- /*
- * Perform a hardware reset with the use of the Watchdog timer.
- */
- at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
- at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-static void __init at91rm9200_dt_timer_init(void)
-{
- of_clk_init(NULL);
- at91rm9200_timer_init();
-}
-
-static void __init rm9200_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- arm_pm_idle = at91rm9200_idle;
- arm_pm_restart = at91rm9200_restart;
- at91_rm9200_pm_init();
-}
-
-
-
-static const char *at91rm9200_dt_board_compat[] __initconst = {
- "atmel,at91rm9200",
- NULL
-};
-
-DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
- .init_time = at91rm9200_dt_timer_init,
- .map_io = at91_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = rm9200_dt_device_init,
- .dt_compat = at91rm9200_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
deleted file mode 100644
index f5d922e57655..000000000000
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Setup code for AT91SAM Evaluation Kits with Device Tree support
- *
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre at atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-
-#include <asm/system_misc.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-
-static void __init sam9_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- arm_pm_idle = at91sam9_idle;
- at91_sam9260_pm_init();
-}
-
-static const char *at91_dt_board_compat[] __initconst = {
- "atmel,at91sam9",
- NULL
-};
-
-DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
- /* Maintainer: Atmel */
- .map_io = at91_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = sam9_dt_device_init,
- .dt_compat = at91_dt_board_compat,
-MACHINE_END
-
-static void __init sam9g45_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- arm_pm_idle = at91sam9_idle;
- at91_sam9g45_pm_init();
-}
-
-static const char *at91_9g45_board_compat[] __initconst = {
- "atmel,at91sam9g45",
- NULL
-};
-
-DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
- /* Maintainer: Atmel */
- .map_io = at91_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = sam9g45_dt_device_init,
- .dt_compat = at91_9g45_board_compat,
-MACHINE_END
-
-static void __init sam9x5_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- arm_pm_idle = at91sam9_idle;
- at91_sam9x5_pm_init();
-}
-
-static const char *at91_9x5_board_compat[] __initconst = {
- "atmel,at91sam9x5",
- "atmel,at91sam9n12",
- NULL
-};
-
-DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
- /* Maintainer: Atmel */
- .map_io = at91_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = sam9x5_dt_device_init,
- .dt_compat = at91_9x5_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
deleted file mode 100644
index 7806f58c7e4d..000000000000
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Setup code for SAMA5 Evaluation Kits with Device Tree support
- *
- * Copyright (C) 2013 Atmel,
- * 2013 Ludovic Desroches <ludovic.desroches at atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/micrel_phy.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/phy.h>
-#include <linux/clk-provider.h>
-
-#include <mach/hardware.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-
-static void __init sama5_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- at91_sam9x5_pm_init();
-}
-
-static const char *sama5_dt_board_compat[] __initconst = {
- "atmel,sama5",
- NULL
-};
-
-DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
- /* Maintainer: Atmel */
- .map_io = at91_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = sama5_dt_device_init,
- .dt_compat = sama5_dt_board_compat,
-MACHINE_END
-
-static struct map_desc at91_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
- .length = SZ_512,
- .type = MT_DEVICE,
- },
- {
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
- .length = SZ_512,
- .type = MT_DEVICE,
- },
- { /* On sama5d4, we use USART3 as serial console */
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
- .length = SZ_256,
- .type = MT_DEVICE,
- },
- { /* A bunch of peripheral with fine grained IO space */
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
- .length = SZ_2K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init sama5_alt_map_io(void)
-{
- at91_alt_map_io();
- iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
-}
-
-static const char *sama5_alt_dt_board_compat[] __initconst = {
- "atmel,sama5d4",
- NULL
-};
-
-DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
- /* Maintainer: Atmel */
- .map_io = sama5_alt_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = sama5_dt_device_init,
- .dt_compat = sama5_alt_dt_board_compat,
- .l2c_aux_mask = ~0UL,
-MACHINE_END
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
new file mode 100644
index 000000000000..12440096762f
--- /dev/null
+++ b/arch/arm/mach-at91/sama5.c
@@ -0,0 +1,95 @@
+/*
+ * Setup code for SAMA5
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches at atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+
+static void __init sama5_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ at91_sam9x5_pm_init();
+}
+
+static const char *sama5_dt_board_compat[] __initconst = {
+ "atmel,sama5",
+ NULL
+};
+
+DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
+ /* Maintainer: Atmel */
+ .map_io = at91_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = sama5_dt_device_init,
+ .dt_compat = sama5_dt_board_compat,
+MACHINE_END
+
+static struct map_desc at91_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
+ .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
+ .length = SZ_512,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
+ .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
+ .length = SZ_512,
+ .type = MT_DEVICE,
+ },
+ { /* On sama5d4, we use USART3 as serial console */
+ .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
+ .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ },
+ { /* A bunch of peripheral with fine grained IO space */
+ .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
+ .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
+ .length = SZ_2K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init sama5_alt_map_io(void)
+{
+ at91_alt_map_io();
+ iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
+}
+
+static const char *sama5_alt_dt_board_compat[] __initconst = {
+ "atmel,sama5d4",
+ NULL
+};
+
+DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
+ /* Maintainer: Atmel */
+ .map_io = sama5_alt_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = sama5_dt_device_init,
+ .dt_compat = sama5_alt_dt_board_compat,
+ .l2c_aux_mask = ~0UL,
+MACHINE_END
--
2.1.3
More information about the linux-arm-kernel
mailing list