[PATCH 5/9] mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Tue Jan 27 06:42:08 PST 2015
On 01/27/2015 11:10 AM, Antoine Tenart wrote:
> The nand controller on Marvell Berlin SoC reuse the pxa3xx nand driver
> as it quite close. The process of sending commands can be compared to
> the one of the Marvell armada 370: read and write commands are done in
> chunks.
>
> But the Berlin nand controller has some other specificities which
> require some modifications of the pxa3xx nand driver:
> - there are no IRQ available so we need to poll the status register: we
> have to use our own cmdfunc Berlin function, and early on the probing
> function.
> - PAGEPROG are very different from the one used in the pxa3xx driver,
> so we're using a specific process for this one
> - the SEQIN command is equivalent to a READ0 command
> - the RNDOUT command must be used to perform a read operation, and the
> command is not NAND_CMD_RNDOUT
> - the ERASE1 command is specific (0xd060)
>
> Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
> ---
> drivers/mtd/nand/pxa3xx_nand.c | 287 +++++++++++++++++++++++++++++++++++++----
> 1 file changed, 261 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index b2783b1f663c..62ea369dc524 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -109,6 +109,8 @@
> #define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
> #define NDCB0_CMD_TYPE_MASK (0x7 << 21)
> #define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
> +#define NDCB0_CMD_XTYPE_MASK (0x7 << 29)
> +#define NDCB0_CMD_XTYPE(x) (((x) << 29) & NDCB0_CMD_XTYPE_MASK)
> #define NDCB0_NC (0x1 << 20)
> #define NDCB0_DBC (0x1 << 19)
> #define NDCB0_ADDR_CYC_MASK (0x7 << 16)
> @@ -117,13 +119,20 @@
> #define NDCB0_CMD1_MASK (0xff)
> #define NDCB0_ADDR_CYC_SHIFT (16)
>
> -#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */
> -#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */
> -#define EXT_CMD_TYPE_READ 4 /* Read */
> -#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */
> -#define EXT_CMD_TYPE_FINAL 3 /* Final command */
> -#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */
> -#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */
> +#define EXT_CMD_TYPE_LAST_PAGEPROG 10
> +#define EXT_CMD_TYPE_CHUNK_PAGEPROG 9
> +#define EXT_CMD_TYPE_LAST_RNDOUT 8
> +#define EXT_CMD_TYPE_CHUNK_RNDOUT 7
> +#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */
> +#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */
> +#define EXT_CMD_TYPE_READ 4 /* Read */
> +#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */
> +#define EXT_CMD_TYPE_FINAL 3 /* Final command */
> +#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */
> +#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */
> +
> +#define BERLIN_NAND_CMD_RNDOUT 0x3000
> +#define BERLIN_NAND_CMD_ERASE1 0xd060
>
> /* macros for registers read/write */
> #define nand_writel(info, off, val) \
> @@ -158,6 +167,7 @@ enum {
> enum pxa3xx_nand_variant {
> PXA3XX_NAND_VARIANT_PXA,
> PXA3XX_NAND_VARIANT_ARMADA370,
> + PXA3XX_NAND_VARIANT_BERLIN2,
> };
>
> struct pxa3xx_nand_host {
> @@ -244,10 +254,13 @@ module_param(use_dma, bool, 0444);
> MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
>
> static struct pxa3xx_nand_timing timing[] = {
> - { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
> - { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
> - { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
> - { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
> + { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
> + { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
> + { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
> + { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
> + { 5, 20, 10, 12, 10, 12, 60000, 60, 10, },
> + { 5, 20, 10, 12, 10, 12, 200000, 120, 10, },
> + { 5, 15, 10, 15, 10, 15, 60000, 60, 10, },
> };
>
> static struct pxa3xx_nand_flash builtin_flash_types[] = {
> @@ -260,6 +273,20 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
> { "512MiB 8-bit", 0xdc2c, 64, 2048, 8, 8, 4096, &timing[2] },
> { "512MiB 16-bit", 0xcc2c, 64, 2048, 16, 16, 4096, &timing[2] },
> { "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] },
> +{ },
> +};
> +
> +static struct pxa3xx_nand_flash berlin_builtin_flash_types[] = {
> +{ "2GiB 8-bit", 0xd5ec, 128, 8192, 8, 8, 2048, &timing[4] },
> +{ "2GiB 8-bit", 0xd598, 128, 8192, 8, 8, 2048, &timing[5] },
> +{ "2GiB 8-bit", 0x482c, 256, 4096, 8, 8, 2048, &timing[6] },
> +{ "4GiB 8-bit", 0xd7ec, 128, 8192, 8, 8, 4096, &timing[5] },
> +{ "8GiB 8-bit", 0xdeec, 128, 8192, 8, 8, 4096, &timing[5] },
> +{ "4GiB 8-bit", 0xd7ad, 256, 8192, 8, 8, 2048, &timing[5] },
> +{ "4GiB 8-bit", 0x682c, 256, 4096, 8, 8, 4096, &timing[6] },
> +{ "8GiB 8-bit", 0x882c, 256, 8192, 8, 8, 4096, &timing[6] },
> +{ "8GiB 8-bit", 0xdead, 256, 8192, 8, 8, 4096, &timing[6] },
> +{ },
> };
>
IMO, this sucks. I was hoping to see this old style probing go away,
instead of be augmented.
There are proper ways to set timings.
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
More information about the linux-arm-kernel
mailing list