[PATCH v3 01/13] pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts

[Wenyou Yang]

From: Sylvain Rochet <sylvain.rochet at finsecur.com>

Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
something went wrong instead of continuing in unknown condition. There
is not much we can do if a PLL lock never ends, we are running in SRAM
and we will not be able to connect back the sdram or ddram in order to
be able to fire up a message or just panic.

As a bonus, not decounting the timeout register in slow clock mode
reduce cumulated suspend time and resume time from ~17ms to ~15ms.

Signed-off-by: Sylvain Rochet <sylvain.rochet at finsecur.com>
---
 arch/arm/mach-at91/pm_slowclock.S |   33 ++++-----------------------------
 1 file changed, 4 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 556151e..50744e7 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -25,11 +25,6 @@
  */
 #undef SLOWDOWN_MASTER_CLOCK
 
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -41,56 +36,36 @@ tmp2	.req	r5
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLB has locked.
  */
 	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKB
 	beq	1b
-2:
 	.endm
 
 	.text
-- 
1.7.9.5