[PATCH 07/16] ARM: integrator: convert PCI to use generic config accesses
Bjorn Helgaas
bhelgaas at google.com
Mon Jan 26 10:22:33 PST 2015
On Thu, Jan 22, 2015 at 02:33:36PM -0600, Bjorn Helgaas wrote:
> On Mon, Jan 12, 2015 at 01:05:12AM +0100, Linus Walleij wrote:
> > On Sat, Jan 10, 2015 at 10:53 PM, Arnd Bergmann <arnd at arndb.de> wrote:
> > > On Saturday 10 January 2015 22:40:22 Linus Walleij wrote:
> > >> > static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
> > >> > int size, u32 *val)
> > >> > {
> > >> > - addr = v3_open_config_window(bus, devfn, where);
> > >> > + int ret = pci_generic_config_read(bus, devfn, where, size, val);
> > >> > v3_close_config_window();
> > >> > + return ret;
> > >> > }
> > >> >
> > >> > static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
> > >> > int size, u32 val)
> > >> > {
> > >> > + int ret = pci_generic_config_write(bus, devfn, where, size, val);
> > >> > v3_close_config_window();
> > >> > - raw_spin_unlock_irqrestore(&v3_lock, flags);
> > >> > + return ret;
> > >> > }
> > >> >
> > >> > static struct pci_ops pci_v3_ops = {
> > >> > + .map_bus = v3_open_config_window,
> > >> > .read = v3_read_config,
> > >> > .write = v3_write_config,
> > >>
> > >> So .map_bus is called before every .read/.write operation I take it.
> > >>
> > >> Wouldn't it be proper to call the v3_close_config_window() from a
> > >> matching .unmap_bus() callback for symmetry?
> > >
> > > It would be nicer for integrator but useless for anything else, so
> > > I'd vote for leaving it the way Rob posted.
> >
> > OK I buy that, throw in a comment about it in the code if there
> > is some time for iterating the patch.
>
> Would you prefer something like the following instead? It keeps the
> v3_open/close symmetry, but it does break apart and duplicate some of the
> logic from v3_open_config_window().
Hearing nothing, I kept Rob's initial version. It can be tweaked later if
anybody wants to. I just want to get all this into v3.20.
Bjorn
> commit 3e0c269a560968002298d22ac47bde4bd45aea8e
> Author: Rob Herring <robh at kernel.org>
> Date: Fri Jan 9 20:34:41 2015 -0600
>
> ARM: integrator: Convert PCI to use generic config accessors
>
> Convert the integrator PCI driver to use the generic config access
> functions.
>
> This changes accesses from __raw_readX/__raw_writeX to readX/writeX
> variants. The spinlock is removed because it is unnecessary. The config
> read and write functions are already protected with a spinlock and no
> access can occur during the .pre_init function.
>
> Signed-off-by: Rob Herring <robh at kernel.org>
> Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
> Acked-by: Linus Walleij <linus.walleij at linaro.org>
> CC: Russell King <linux at arm.linux.org.uk>
> CC: linux-arm-kernel at lists.infradead.org
>
> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
> index c186a17c2cff..c1098729cf8a 100644
> --- a/arch/arm/mach-integrator/pci_v3.c
> +++ b/arch/arm/mach-integrator/pci_v3.c
> @@ -324,7 +324,7 @@ static u64 pre_mem_pci_sz;
> * configuration address space, you present the V3 with the following pattern
> * (which is very nearly a type 1 (except that the lower two bits are 00 and
> * not 01). In order for this mapping to work you need to set up one of
> - * the local to PCI aperatures to 16Mbytes in length translating to
> + * the local to PCI apertures to 16Mbytes in length translating to
> * PCI configuration space starting at 0x0000.0000.
> *
> * PCI configuration cycles look like this:
> @@ -356,15 +356,14 @@ static u64 pre_mem_pci_sz;
> * 7:2 register number
> *
> */
> -static DEFINE_RAW_SPINLOCK(v3_lock);
>
> #undef V3_LB_BASE_PREFETCH
> #define V3_LB_BASE_PREFETCH 0
>
> -static void __iomem *v3_open_config_window(struct pci_bus *bus,
> - unsigned int devfn, int offset)
> +static void v3_open_config_window(struct pci_bus *bus, unsigned int devfn,
> + int offset)
> {
> - unsigned int address, mapaddress, busnr;
> + unsigned int mapaddress, busnr;
>
> busnr = bus->number;
>
> @@ -381,14 +380,10 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus,
> /*
> * local bus segment so need a type 0 config cycle
> *
> - * build the PCI configuration "address" with one-hot in
> - * A31-A11
> - *
> * mapaddress:
> * 3:1 = config cycle (101)
> * 0 = PCI A1 & A0 are 0 (0)
> */
> - address = PCI_FUNC(devfn) << 8;
> mapaddress = V3_LB_MAP_TYPE_CONFIG;
>
> if (slot > 12)
> @@ -396,26 +391,15 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus,
> * high order bits are handled by the MAP register
> */
> mapaddress |= 1 << (slot - 5);
> - else
> - /*
> - * low order bits handled directly in the address
> - */
> - address |= 1 << (slot + 11);
> } else {
> /*
> * not the local bus segment so need a type 1 config cycle
> *
> - * address:
> - * 23:16 = bus number
> - * 15:11 = slot number (7:3 of devfn)
> - * 10:8 = func number (2:0 of devfn)
> - *
> * mapaddress:
> * 3:1 = config cycle (101)
> * 0 = PCI A1 & A0 from host bus (1)
> */
> mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
> - address = (busnr << 16) | (devfn << 8);
> }
>
> /*
> @@ -432,8 +416,6 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus,
> v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) |
> V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
> v3_writew(V3_LB_MAP1, mapaddress);
> -
> - return PCI_CONFIG_VADDR + address + offset;
> }
>
> static void v3_close_config_window(void)
> @@ -454,70 +436,66 @@ static void v3_close_config_window(void)
> V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
> }
>
> -static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
> - int size, u32 *val)
> +static void __iomem *v3_map_bus(struct pci_bus *bus,
> + unsigned int devfn, int offset)
> {
> - void __iomem *addr;
> - unsigned long flags;
> - u32 v;
> + unsigned int busnr = bus->number;
> + unsigned int address;
>
> - raw_spin_lock_irqsave(&v3_lock, flags);
> - addr = v3_open_config_window(bus, devfn, where);
> -
> - switch (size) {
> - case 1:
> - v = __raw_readb(addr);
> - break;
> + if (busnr == 0) {
> + int slot = PCI_SLOT(devfn);
>
> - case 2:
> - v = __raw_readw(addr);
> - break;
> + /*
> + * build the PCI configuration "address" with function in
> + * A10-A8 and device one-hot in A31-A11
> + */
> + address = PCI_FUNC(devfn) << 8;
>
> - default:
> - v = __raw_readl(addr);
> - break;
> + /*
> + * high order bits are handled by the MAP register;
> + * low order bits handled directly in the address
> + */
> + if (slot <= 12)
> + address |= 1 << (slot + 11);
> + } else {
> + /*
> + * not the local bus segment so need a type 1 config cycle
> + *
> + * address:
> + * 23:16 = bus number
> + * 15:11 = slot number (7:3 of devfn)
> + * 10:8 = func number (2:0 of devfn)
> + */
> + address = (busnr << 16) | (devfn << 8);
> }
>
> - v3_close_config_window();
> - raw_spin_unlock_irqrestore(&v3_lock, flags);
> + return PCI_CONFIG_VADDR + address + offset;
> +}
> +
> +static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
> + int size, u32 *val)
> +{
> + int ret;
>
> - *val = v;
> - return PCIBIOS_SUCCESSFUL;
> + v3_open_config_window();
> + ret = pci_generic_config_read(bus, devfn, where, size, val);
> + v3_close_config_window();
> + return ret;
> }
>
> static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
> int size, u32 val)
> {
> - void __iomem *addr;
> - unsigned long flags;
> -
> - raw_spin_lock_irqsave(&v3_lock, flags);
> - addr = v3_open_config_window(bus, devfn, where);
> -
> - switch (size) {
> - case 1:
> - __raw_writeb((u8)val, addr);
> - __raw_readb(addr);
> - break;
> -
> - case 2:
> - __raw_writew((u16)val, addr);
> - __raw_readw(addr);
> - break;
> -
> - case 4:
> - __raw_writel(val, addr);
> - __raw_readl(addr);
> - break;
> - }
> + int ret;
>
> + v3_open_config_window();
> + ret = pci_generic_config_write(bus, devfn, where, size, val);
> v3_close_config_window();
> - raw_spin_unlock_irqrestore(&v3_lock, flags);
> -
> - return PCIBIOS_SUCCESSFUL;
> + return ret;
> }
>
> static struct pci_ops pci_v3_ops = {
> + .map_bus = v3_map_bus,
> .read = v3_read_config,
> .write = v3_write_config,
> };
> @@ -672,8 +650,6 @@ static void __init pci_v3_preinit(void)
> hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
> hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
>
> - raw_spin_lock_irqsave(&v3_lock, flags);
> -
> /*
> * Unlock V3 registers, but only if they were previously locked.
> */
> @@ -736,8 +712,6 @@ static void __init pci_v3_preinit(void)
> v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
> v3_writeb(V3_LB_IMASK, 0x28);
> __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
> -
> - raw_spin_unlock_irqrestore(&v3_lock, flags);
> }
>
> static void __init pci_v3_postinit(void)
More information about the linux-arm-kernel
mailing list