3.19 on Nokia n900: audio quality awful

[Peter Ujfalusi]

On 01/18/2015 02:01 PM, Pavel Machek wrote:
> Hi!
> 
> If you have any idea about playback problems, help would be still
> welcome. I'll have to do bisect, otherwise, and it will not be easy.
> 
>> In 3.18, sound is nice and clear.
>>
>> In 3.19, sound is unusable. It produces nasty tone when it should be
>> quiet, and there's at least as much noise as is sound.
>>
>> Unfortunately, list of mixers also changed (and there's cca 120
>> settings), but a) it does not work with the old list and b) nothing I
>> could figure out did make the sound usable. Some setting resulted in
>> even more noise.
>>
>> Any idea what could have caused it?
> 
> I tried audio recording this time.
> 
> In 2.6.28-nokia, it is neccessary to set "Input select" na "digital
> mic", then it works. Input select being in "playback" option makes it
> easy to miss.
> 
> In 3.18 and 3.19-rc3, all I can record are zeros.
> 
> Does playback/recording work for you on OMAP 3430-based machines?

Same codec (tlv320aic3106) works fine on my am335x and omap-l138 boards.
BeagleBoard-xM also fine with twl4030 codec.

I don't have my n900 in hacking mode (it is still in use time-to-time) but
looking at the dts file: you might want to add ai3x-micbias-vg property to the
aic3x nodes to select the correct mic bias voltage. I can't recall what is
appropriate for n900, but 2.6.28-nokia sources might give you the answer.

-- 
Péter