[PATCH v2] ARM: AM43xx: hwmod: add VPFE hwmod entries

Paul Walmsley paul at pwsan.com
Sun Jan 25 18:15:45 PST 2015


Hi

On Sun, 25 Jan 2015, Lad, Prabhakar wrote:

> From: Benoit Parrot <bparrot at ti.com>
> 
> this patch adds VPFE HWMOD data for AM43xx.
> 
> Signed-off-by: Benoit Parrot <bparrot at ti.com>
> Signed-off-by: Darren Etheridge <detheridge at ti.com>
> Signed-off-by: Felipe Balbi <balbi at ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg at gmail.com>
> ---
>  Hi Paul,
>  
>  You were right, the hardware team has confirmed that, the VPFE master port is
>  connected to L3 and the VPFE slave port is connected to L4. The L3 port cannot
>  serve as a register target because it is initiator only.

OK makes sense to me.,

>  
>  I have created links referring to dss l3/l4 hwmod and tested it, lemme know
>  if I have missed something.

A few minor comments below

>  
>  arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 72 ++++++++++++++++++++++++++++++
>  arch/arm/mach-omap2/prcm43xx.h             |  3 +-
>  2 files changed, 74 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index 5c6c841..3787824 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -514,6 +514,44 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
>  	},
>  };
>  
> +static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
> +	.rev_offs       = 0x0,
> +	.sysc_offs      = 0x104,
> +	.sysc_flags     = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
> +	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> +				MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
> +	.sysc_fields    = &omap_hwmod_sysc_type2,
> +};
> +
> +static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
> +	.name           = "vpfe",
> +	.sysc           = &am43xx_vpfe_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_vpfe0_hwmod = {
> +	.name           = "vpfe0",
> +	.class          = &am43xx_vpfe_hwmod_class,
> +	.clkdm_name     = "l3s_clkdm",
> +	.prcm           = {
> +		.omap4  = {
> +			.modulemode     = MODULEMODE_SWCTRL,
> +			.clkctrl_offs   = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
> +		},
> +	},
> +};
> +
> +static struct omap_hwmod am43xx_vpfe1_hwmod = {
> +	.name           = "vpfe1",
> +	.class          = &am43xx_vpfe_hwmod_class,
> +	.clkdm_name     = "l3s_clkdm",
> +	.prcm           = {
> +		.omap4  = {
> +			.modulemode     = MODULEMODE_SWCTRL,
> +			.clkctrl_offs   = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
> +		},
> +	},
> +};
> +
>  /* Interfaces */
>  static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
>  	.master		= &am33xx_l3_main_hwmod,
> @@ -788,6 +826,36 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
> +	.master         = &am43xx_vpfe0_hwmod,
> +	.slave          = &am33xx_l3_main_hwmod,
> +	.clk            = "l3_gclk",
> +	.flags          = OCPIF_SWSUP_IDLE,

OCPIF_SWSUP_IDLE probably isn't needed here.  Could you please try without 
it?

> +	.user           = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
> +	.master         = &am43xx_vpfe1_hwmod,
> +	.slave          = &am33xx_l3_main_hwmod,
> +	.clk            = "l3_gclk",
> +	.flags          = OCPIF_SWSUP_IDLE,

Same point as the above.

> +	.user           = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = {
> +	.master         = &am33xx_l4_ls_hwmod,
> +	.slave          = &am43xx_vpfe0_hwmod,
> +	.clk            = "l4ls_gclk",
> +	.user           = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = {
> +	.master         = &am33xx_l4_ls_hwmod,
> +	.slave          = &am43xx_vpfe1_hwmod,
> +	.clk            = "l4ls_gclk",
> +	.user           = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
>  	&am33xx_l4_wkup__synctimer,
>  	&am43xx_l4_ls__timer8,
> @@ -887,6 +955,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
>  	&am43xx_l4_ls__dss,
>  	&am43xx_l4_ls__dss_dispc,
>  	&am43xx_l4_ls__dss_rfbi,
> +	&am43xx_l3__vpfe0,
> +	&am43xx_l3__vpfe1,
> +	&am43xx_l4_ls__vpfe0,
> +	&am43xx_l4_ls__vpfe1,
>  	NULL,
>  };
>  
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index ad7b3e9..8aa4c2c 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -143,5 +143,6 @@
>  #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET        0x0268
>  #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET	0x05C0
>  #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET		0x0a20
> -
> +#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET		0x0068
> +#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET		0x0070
>  #endif
> -- 
> 2.1.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


- Paul



More information about the linux-arm-kernel mailing list