[PATCH 17/18] spi/xilinx: Remove remaining_words driver data variable
Ricardo Ribalda Delgado
ricardo.ribalda at gmail.com
Fri Jan 23 08:08:49 PST 2015
The variable never leaves the scope of txrx_bufs.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda at gmail.com>
---
drivers/spi/spi-xilinx.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 8c25c59..026f4c5 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -86,7 +86,6 @@ struct xilinx_spi {
u8 *rx_ptr; /* pointer in the Tx buffer */
const u8 *tx_ptr; /* pointer in the Rx buffer */
- int remaining_words; /* the number of words left to transfer */
u8 bytes_per_word;
int buffer_size; /* buffer size in words */
u32 cs_inactive; /* Level of the CS pins when inactive*/
@@ -209,33 +208,27 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
return 0;
}
-static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi, int n_words)
-{
- xspi->remaining_words -= n_words;
-
- while (n_words--)
- xilinx_spi_tx(xspi);
- return;
-}
-
static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
+ int remaining_words; /* the number of words left to transfer */
/* We get here with transmitter inhibited */
xspi->tx_ptr = t->tx_buf;
xspi->rx_ptr = t->rx_buf;
- xspi->remaining_words = t->len / xspi->bytes_per_word;
+ remaining_words = t->len / xspi->bytes_per_word;
reinit_completion(&xspi->done);
- while (xspi->remaining_words) {
+ while (remaining_words) {
u16 cr = 0;
- int n_words;
+ int n_words, tx_words, rx_words;
- n_words = min(xspi->remaining_words, xspi->buffer_size);
+ n_words = min(remaining_words, xspi->buffer_size);
- xilinx_spi_fill_tx_fifo(xspi, n_words);
+ tx_words = n_words;
+ while (tx_words--)
+ xilinx_spi_tx(xspi);
/* Start the transfer by not inhibiting the transmitter any
* longer
@@ -261,8 +254,11 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
xspi->regs + XSPI_CR_OFFSET);
/* Read out all the data from the Rx FIFO */
- while (n_words--)
+ rx_words = n_words;
+ while (rx_words--)
xilinx_spi_rx(xspi);
+
+ remaining_words -= n_words;
}
return t->len;
--
2.1.4
More information about the linux-arm-kernel
mailing list