[PATCH 2/2] ARM: mvebu: a385-db-ap: Enable the NAND
Maxime Ripard
maxime.ripard at free-electrons.com
Fri Jan 23 07:41:43 PST 2015
The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from
Micron as its main storage. Enable it.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index b891b4c897f5..ee648fb19075 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -130,6 +130,19 @@
phy-mode = "rgmii-id";
};
+ nfc: flash at d0000 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ num-cs = <1>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ };
+
usb3 at f0000 {
status = "okay";
usb-phy = <&usb3_phy>;
--
2.2.2
More information about the linux-arm-kernel
mailing list