[PATCH v2 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951

Marcin Wojtas mw at semihalf.com
Fri Jan 23 03:33:00 PST 2015


Dear Gregory,


> @@ -118,8 +118,11 @@ static int mv_conf_mbus_windows(struct platform_device *pdev,
>         return 0;
>  }
>
> -static int armada_38x_quirks(struct sdhci_host *host)
> +static int armada_38x_quirks(struct platform_device *pdev,
> +                            struct sdhci_host *host)
>  {
> +       struct device_node *np = pdev->dev.of_node;
> +
>         host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
>         /*
>          * According to erratum 'FE-2946959' both SDR50 and DDR50
> @@ -129,6 +132,20 @@ static int armada_38x_quirks(struct sdhci_host *host)
>          */
>         host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
>         host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);
> +
> +       /*
> +        * According to erratum 'ERR-7878951' Armada 38x SDHCI
> +        * controller has different capabilities than the ones shown
> +        * in its registers
> +        */
> +       host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> +       if (of_get_property(np, "no-1-8-v", NULL)) {
> +               host->caps &= ~SDHCI_CAN_VDD_180;
> +               host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
> +       } else
> +               host->caps &= ~SDHCI_CAN_VDD_330;

In this "else" there is one thing missing
host->mmc->caps |= MMC_CAP_1_8V_DDR;
because it's not set by default, however it's not a must - please see
my remark below.

> +       host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING);
> +
>         return 0;
>  }
>
> @@ -333,7 +350,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
>                 clk_prepare_enable(pxa->clk_core);
>
>         if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
> -               ret = armada_38x_quirks(host);
> +               ret = armada_38x_quirks(pdev, host);
>                 if (ret < 0)
>                         goto err_quirks;
>                 ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
> @@ -341,9 +358,6 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
>                         goto err_mbus_win;
>         }
>
> -       /* enable 1/8V DDR capable */
> -       host->mmc->caps |= MMC_CAP_1_8V_DDR;
> -

Now, with this change MMC_CAP_1_8V_DDR is disabled for devices other
than Armada 38x, that use sdhci-pxav3. There are two options:
1. Move those lines above the place where armada_38x_quirks is called
(IMO the easiest option - 'else' in this function would not need to be
supplemented, as I pointed above)
2. Leave it "as is" here, but a condition below is needed (+
supplementation of 'else' in armada_38x_quirks)
 if (!of_device_is_compatible(np, "marvell,armada-380-sdhci"))

Best regards,
Marcin



More information about the linux-arm-kernel mailing list