[PATCH v2 0/2] ARM: shmobile: kzm9g: Declare the full 512 MiB of RAM

Geert Uytterhoeven geert at linux-m68k.org
Fri Jan 23 01:55:04 PST 2015


Hi Simon,

On Fri, Jan 23, 2015 at 5:22 AM, Simon Horman <horms at verge.net.au> wrote:
> On Thu, Jan 22, 2015 at 11:51:42AM +0900, Simon Horman wrote:
>> On Thu, Jan 08, 2015 at 09:14:12AM +0900, Simon Horman wrote:
>> > On Tue, Jan 06, 2015 at 08:17:37PM +0100, Geert Uytterhoeven wrote:
>> > >   Hi Simon, Magnus,
>> > >
>> > > This patch series prepares kzm9g and kzm9g-reference dts for booting a
>> > > multi-platform kernel.
>> > >
>> > > Traditionally, the first 16 MiB of RAM was reserved for the RT
>> > > processor.  However, this is incompatible with CONFIG_AUTO_ZRELADDR=y,
>> > > which requires that the start address of physical memory is a multiple
>> > > of 128 MiB.
>> > >
>> > > As CONFIG_AUTO_ZRELADDR=y is enabled for multi-platform kernels, declare
>> > > RAM to start at 0x40000000.
>> > >
>> > > While at it, reclaim the last 8 MiB of RAM, too, so the full 512 MiB is
>> > > available. We don't know the exact reason why the last 8 MiB of RAM
>> > > was reserved, but thanks to Simon we know it is not used for a U-Boot
>> > > splash screen.  Note that kzm9g_defconfig still has
>> > > CONFIG_MEMORY_START=0x41000000 and CONFIG_MEMORY_SIZE=0x1f000000, so
>> > > before the advent of DT we scribbled over the last 8 MiB, too.
>> > >
>> > > This is an alternative solution for "[PATCH v2 01/05] ARM: shmobile:
>> > > kzm9g-reference: 0x48008000 load address"
>> > > (http://www.spinics.net/lists/linux-sh/msg38385.html), which
>> > > (a) doesn't loose 112 MiB of RAM, and
>> > > (b) doesn't force to switch from zImage to uImage.
>> > >
>> > > Thanks for applying!
>> >
>> > Thanks, done.
>>
>> For the record: Olof has asked for review comments for the BSC driver and
>> binding patches. Accordingly I have dropped them, and these patches which
>> depend on them, from next.
>>
>> This dependency may be due to the way the branches are arranged, rather
>> than actual dependencies of the code. But regardless I am dropping all
>> effected branches for now.
>
> I have now had a chance to re-examine these patches and it seems to me that
> they do not depend on the BSC driver (or anything elsei other than possibly
> for context).  With that in mind I have queued them up in the dt-for-v3.21
> branch and pushed this as part of renesas-devel-20150123-v3.19-rc5.
>
> Please take a moment to see if what I have done makes sense to you.

OK, Thanks!

> For reference this covers the following patches which comprised this series:
>
> Geert Uytterhoeven (2):
>   ARM: shmobile: kzm9g dts: Declare the full 512 MiB of RAM
>   ARM: shmobile: kzm9g-reference dts: Declare the full 512 MiB of RAM

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



More information about the linux-arm-kernel mailing list