[PATCH 2/2] ARM: ux500: Remove unused functions and structs

[Lee Jones]

On Thu, 22 Jan 2015, Rickard Strandqvist wrote:

> Remove same unused functions and structs.

Repeating the subject line in the commit message is seldom
appropriate.  Please elaborate.

> Signed-off-by: Rickard Strandqvist <rickard_strandqvist at spectrumdigital.se>
> ---
>  arch/arm/mach-ux500/board-mop500-regulators.c |  106 -------------------------
>  arch/arm/mach-ux500/board-mop500-regulators.h |    5 --
>  2 files changed, 111 deletions(-)
> 
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
> index 32d744e..2b8f685 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.c
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.c
> @@ -19,17 +19,6 @@ static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
>         REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
>  };
>  
> -struct regulator_init_data gpio_en_3v3_regulator = {
> -       .constraints = {
> -               .name = "EN-3V3",
> -               .min_uV = 3300000,
> -               .max_uV = 3300000,
> -               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> -       },
> -       .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
> -       .consumer_supplies = gpio_en_3v3_consumers,
> -};
> -
>  /*
>   * TPS61052 regulator
>   */
> @@ -43,17 +32,6 @@ static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
>  	REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
>  };
>  
> -struct regulator_init_data tps61052_regulator = {
> -	.constraints = {
> -		.name = "vaudio-hf",
> -		.min_uV = 4500000,
> -		.max_uV = 4500000,
> -		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> -	},
> -	.num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
> -	.consumer_supplies = tps61052_vaudio_consumers,
> -};
> -

I guess we issue all of this stuff from DT now.

>  static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
>  	/* Main display, u8500 R3 uib */
>  	REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
> @@ -483,11 +461,6 @@ static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
>  	REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
>  };
>  
> -/* extended configuration for VextSupply2, only used for HREFP_V20 boards */
> -static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = {
> -	.hwreq = true,
> -};
> -

So if we're not passing this stuff from platform data anymore, why is
the struct required at all?  It's the one you moved in patch 1 right?

>  /*
>   * AB8500 external regulators
>   */
> @@ -984,82 +957,3 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
>  	.ext_regulator          = ab8500_ext_regulators,
>  	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
>  };
> -
> -struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
> -	.reg_init               = ab8505_reg_init,
> -	.num_reg_init           = ARRAY_SIZE(ab8505_reg_init),
> -	.regulator              = ab8505_regulators,
> -	.num_regulator          = ARRAY_SIZE(ab8505_regulators),
> -};
> -
> -static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
> -{
> -	int i;
> -
> -	if (cpu_is_u8520()) {
> -		for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) {
> -			if (ab8505_reg_init[i].id == id) {
> -				u8 initval = ab8505_reg_init[i].value;
> -				initval = (initval & ~mask) | (value & mask);
> -				ab8505_reg_init[i].value = initval;
> -
> -				BUG_ON(mask & ~ab8505_reg_init[i].mask);
> -				return;
> -			}
> -		}
> -	} else {
> -		for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
> -			if (ab8500_reg_init[i].id == id) {
> -				u8 initval = ab8500_reg_init[i].value;
> -				initval = (initval & ~mask) | (value & mask);
> -				ab8500_reg_init[i].value = initval;
> -
> -				BUG_ON(mask & ~ab8500_reg_init[i].mask);
> -				return;
> -			}
> -		}
> -	}
> -
> -	BUG_ON(1);
> -}
> -
> -void mop500_regulator_init(void)
> -{
> -	struct regulator_init_data *regulator;
> -
> -	/*
> -	 * Temporarily turn on Vaux2 on 8520 machine
> -	 */
> -	if (cpu_is_u8520()) {
> -		/* Vaux2 initialized to be on */
> -		ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05);
> -	}
> -
> -	/*
> -	 * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
> -	 * all HREFP_V20 boards)
> -	 */
> -	if (cpu_is_u8500v20()) {
> -		/* VextSupply2RequestCtrl =  HP/OFF depending on VxRequest */
> -		ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);
> -
> -		/* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
> -		ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
> -			0x20, 0x20);
> -
> -		/* VextSupply2 = force HP at initialization */
> -		ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);
> -
> -		/* enable VextSupply2 during platform active */
> -		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
> -		regulator->constraints.always_on = 1;
> -
> -		/* disable VextSupply2 in suspend */
> -		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
> -		regulator->constraints.state_mem.disabled = 1;
> -		regulator->constraints.state_standby.disabled = 1;
> -
> -		/* enable VextSupply2 HW control (used in suspend) */
> -		regulator->driver_data = (void *)&ab8500_ext_supply2;
> -	}
> -}
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
> index 9bece38..88da2b8 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.h
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.h
> @@ -15,10 +15,5 @@
>  #include <linux/regulator/ab8500.h>
>  
>  extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
> -extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
> -extern struct regulator_init_data tps61052_regulator;
> -extern struct regulator_init_data gpio_en_3v3_regulator;
> -
> -void mop500_regulator_init(void);
>  
>  #endif

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog