[PATCH v2] drm/i2c: tda998x: Set the CEC I2C address based on the slave I2C address.

[Russell King - ARM Linux]

On Wed, Jan 21, 2015 at 06:44:05PM +0000, Liviu Dudau wrote:
> On Fri, Nov 07, 2014 at 08:31:25AM +0000, Andrew Jackson wrote:
> > The I2C address for the TDA9989 and TDA19989 is fixed at 0x34
> > but the two LSBs of the TDA19988's address are set by two configuration
> > pins on the chip.  Irrespective of the chip, the associated CEC
> > peripheral's I2C address is based upon the main I2C address.
> > 
> > This patch avoids any special handling required to support
> > systems that contain multiple TDA19988 devices on the same
> > I2C bus.
> > 
> > Signed-off-by: Andrew Jackson <Andrew.Jackson at arm.com>
> > Signed-off-by: Liviu Dudau <Liviu.Dudau at arm.com>
> 
> Hi Andrew,
> 
> What is the status of this patch? Is it going to be pulled by anyone?

It's been sent to David.

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.