[PATCH v3 2/3] mfd: lubbock_io: add lubbock_io board

[Russell King - ARM Linux]

On Wed, Jan 21, 2015 at 12:35:51PM +0000, Lee Jones wrote:
> I think to set an edge trigger on an IRQ, you should instead do so via
> irq_set_irq_type(), or have a missed a line or two?

Setting the IRQ type in request_irq() is perfectly acceptable.

include/linux/interrupt.h:
/*
 * These correspond to the IORESOURCE_IRQ_* defines in
 * linux/ioport.h to select the interrupt line behaviour.  When
 * requesting an interrupt without specifying a IRQF_TRIGGER, the
 * setting should be assumed to be "as already configured", which
 * may be as per machine or firmware initialisation.
 */
#define IRQF_TRIGGER_NONE       0x00000000
#define IRQF_TRIGGER_RISING     0x00000001
#define IRQF_TRIGGER_FALLING    0x00000002
#define IRQF_TRIGGER_HIGH       0x00000004
#define IRQF_TRIGGER_LOW        0x00000008


-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.