[PATCH] arm64: Add L2 cache topology to ARM Ltd boards/models

[Sudeep Holla]

Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache
information") adds cacheinfo support for ARM64. Since there's no
architectural way of detecting the cpus that share particular cache,
device tree can be used and the core cacheinfo already supports the
same.

This patch adds the L2 cache topology on Juno board, FVP/RTSM and
foundation models.

Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Liviu Dudau <Liviu.Dudau at arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
---
 arch/arm64/boot/dts/arm/foundation-v8.dts  |  8 ++++++++
 arch/arm64/boot/dts/arm/juno.dts           | 14 ++++++++++++++
 arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts |  8 ++++++++
 3 files changed, 30 insertions(+)

Hi Arnd/Olof,

Though this patch and commit 5d425c18653731af6 ("arm64: kernel: add
support for cpu cache information") which is in -next(via arm64) are
dependent to provide desired functionality, then can go indepedently
if you think there could be conflicts if this change is taken via arm64.
If not, Catalin can pick up with your acks after the review.

Regards,
Sudeep

diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
index 27f32962e55c..4eac8dcea423 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -34,6 +34,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
@@ -41,6 +42,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
 		};
 		cpu at 2 {
 			device_type = "cpu";
@@ -48,6 +50,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
 		};
 		cpu at 3 {
 			device_type = "cpu";
@@ -55,6 +58,11 @@
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index cb3073e4e7a8..15dafbb24426 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -39,6 +39,7 @@
 			reg = <0x0 0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&A57_L2>;
 		};
 
 		A57_1: cpu at 1 {
@@ -46,6 +47,7 @@
 			reg = <0x0 0x1>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&A57_L2>;
 		};
 
 		A53_0: cpu at 100 {
@@ -53,6 +55,7 @@
 			reg = <0x0 0x100>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
 		};
 
 		A53_1: cpu at 101 {
@@ -60,6 +63,7 @@
 			reg = <0x0 0x101>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
 		};
 
 		A53_2: cpu at 102 {
@@ -67,6 +71,7 @@
 			reg = <0x0 0x102>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
 		};
 
 		A53_3: cpu at 103 {
@@ -74,6 +79,15 @@
 			reg = <0x0 0x103>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A57_L2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index efc59b3baf63..20addabbd127 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -37,6 +37,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
@@ -44,6 +45,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
 		};
 		cpu at 2 {
 			device_type = "cpu";
@@ -51,6 +53,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
 		};
 		cpu at 3 {
 			device_type = "cpu";
@@ -58,6 +61,11 @@
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
 		};
 	};
 
-- 
1.9.1