[PATCH 1/2] clk: exynos5420: Add IDs for clocks used in DISP1 power domain

[Javier Martinez Canillas]

Hello,

On 01/20/2015 06:54 PM, Mike Turquette wrote:
> Quoting Sylwester Nawrocki (2015-01-20 06:04:00)
>> Hi,
>> 
>> On 20/01/15 11:35, Javier Martinez Canillas wrote:
>> > When a power domain is powered off on Exynos5420 SoC, the input clocks of
>> > the devices attached to this power domain are re-parented to oscclk and
>> > restored to the original parent after powering on the power domain.
>> > 
>> > So a reference to the input and parent clocks for the devices attached to
>> > a power domain are needed to be able to do the re-parenting. The DISP1 pd
>> > includes modules which uses the following clocks:
>> > 
>> > ACLK_200_DISP1 (MIXER and HDMILINK)
>> > ACLK_300_DISP1 (FIMD1)
>> > ACLK_400_DISP1 (Internal Buses)
>> > 
>> > Each of these clocks are generated as the output of a clock mux so add an
>> > ID for all of these clock muxes and their parents to be referenced in the
>> > DISP1 power domain device node.
>> > 
>> > Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
>> 
>> The patch looks OK to me, I'm fine with it being merged via Kukjin's tree
>> due to the dts dependencies (including other pending dts patches touching
>> the arch/arm/boot/dts/exynos5420.dtsi file).
>> I think we need also Mike ACK for that, I could also queue the patch for
>> the clk tree and create a topic branch, but merging both patches via
>> arm-soc seems a more sane option in this case.
>> 
>> Acked-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
> 
> Acked-by: Michael Turquette <mturquette at linaro.org>
> 

Thanks a lot Sylwester and Mike for your acks.

Kukjin, could you please pick $subject and "Patch 2/2 ARM: dts: Add DISP1
power domain for exynos5420" through your tree?

Best regards,
Javier