[PATCH v8 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding

Lee Jones lee.jones at linaro.org
Tue Jan 20 09:01:41 PST 2015


On Wed, 26 Nov 2014, Bjorn Andersson wrote:

> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson at sonymobile.com>
> ---
> 
> Removed regulator definition from this patch, as these needs more discussion to
> be able to implement SoC assisted power save features of the Qualcomm
> platforms. No other changes.
> 
>  Documentation/devicetree/bindings/mfd/qcom-rpm.txt |  70 ++++++++++
>  include/dt-bindings/mfd/qcom-rpm.h                 | 154 +++++++++++++++++++++
>  2 files changed, 224 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
>  create mode 100644 include/dt-bindings/mfd/qcom-rpm.h

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> new file mode 100644
> index 0000000..85e3198
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -0,0 +1,70 @@
> +Qualcomm Resource Power Manager (RPM)
> +
> +This driver is used to interface with the Resource Power Manager (RPM) found in
> +various Qualcomm platforms. The RPM allows each component in the system to vote
> +for state of the system resources, such as clocks, regulators and bus
> +frequencies.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be one of:
> +		    "qcom,rpm-apq8064"
> +		    "qcom,rpm-msm8660"
> +		    "qcom,rpm-msm8960"
> +
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: base address and size of the RPM's message ram
> +
> +- interrupts:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: three entries specifying the RPM's:
> +		    1. acknowledgement interrupt
> +		    2. error interrupt
> +		    3. wakeup interrupt
> +
> +- interrupt-names:
> +	Usage: required
> +	Value type: <string-array>
> +	Definition: must be the three strings "ack", "err" and "wakeup", in order
> +
> +- #address-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 1
> +
> +- #size-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 0
> +
> +- qcom,ipc:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +
> +	Definition: three entries specifying the outgoing ipc bit used for
> +		    signaling the RPM:
> +		    - phandle to a syscon node representing the apcs registers
> +		    - u32 representing offset to the register within the syscon
> +		    - u32 representing the ipc bit within the register
> +
> +
> += EXAMPLE
> +
> +	#include <dt-bindings/mfd/qcom-rpm.h>
> +
> +	rpm at 108000 {
> +		compatible = "qcom,rpm-msm8960";
> +		reg = <0x108000 0x1000>;
> +		qcom,ipc = <&apcs 0x8 2>;
> +
> +		interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> +		interrupt-names = "ack", "err", "wakeup";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
> new file mode 100644
> index 0000000..388a6f3
> --- /dev/null
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -0,0 +1,154 @@
> +/*
> + * This header provides constants for the Qualcomm RPM bindings.
> + */
> +
> +#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
> +#define _DT_BINDINGS_MFD_QCOM_RPM_H
> +
> +/*
> + * Constants use to identify individual resources in the RPM.
> + */
> +#define QCOM_RPM_APPS_FABRIC_ARB		1
> +#define QCOM_RPM_APPS_FABRIC_CLK		2
> +#define QCOM_RPM_APPS_FABRIC_HALT		3
> +#define QCOM_RPM_APPS_FABRIC_IOCTL		4
> +#define QCOM_RPM_APPS_FABRIC_MODE		5
> +#define QCOM_RPM_APPS_L2_CACHE_CTL		6
> +#define QCOM_RPM_CFPB_CLK			7
> +#define QCOM_RPM_CXO_BUFFERS			8
> +#define QCOM_RPM_CXO_CLK			9
> +#define QCOM_RPM_DAYTONA_FABRIC_CLK		10
> +#define QCOM_RPM_DDR_DMM			11
> +#define QCOM_RPM_EBI1_CLK			12
> +#define QCOM_RPM_HDMI_SWITCH			13
> +#define QCOM_RPM_MMFPB_CLK			14
> +#define QCOM_RPM_MM_FABRIC_ARB			15
> +#define QCOM_RPM_MM_FABRIC_CLK			16
> +#define QCOM_RPM_MM_FABRIC_HALT			17
> +#define QCOM_RPM_MM_FABRIC_IOCTL		18
> +#define QCOM_RPM_MM_FABRIC_MODE			19
> +#define QCOM_RPM_PLL_4				20
> +#define QCOM_RPM_PM8058_LDO0			21
> +#define QCOM_RPM_PM8058_LDO1			22
> +#define QCOM_RPM_PM8058_LDO2			23
> +#define QCOM_RPM_PM8058_LDO3			24
> +#define QCOM_RPM_PM8058_LDO4			25
> +#define QCOM_RPM_PM8058_LDO5			26
> +#define QCOM_RPM_PM8058_LDO6			27
> +#define QCOM_RPM_PM8058_LDO7			28
> +#define QCOM_RPM_PM8058_LDO8			29
> +#define QCOM_RPM_PM8058_LDO9			30
> +#define QCOM_RPM_PM8058_LDO10			31
> +#define QCOM_RPM_PM8058_LDO11			32
> +#define QCOM_RPM_PM8058_LDO12			33
> +#define QCOM_RPM_PM8058_LDO13			34
> +#define QCOM_RPM_PM8058_LDO14			35
> +#define QCOM_RPM_PM8058_LDO15			36
> +#define QCOM_RPM_PM8058_LDO16			37
> +#define QCOM_RPM_PM8058_LDO17			38
> +#define QCOM_RPM_PM8058_LDO18			39
> +#define QCOM_RPM_PM8058_LDO19			40
> +#define QCOM_RPM_PM8058_LDO20			41
> +#define QCOM_RPM_PM8058_LDO21			42
> +#define QCOM_RPM_PM8058_LDO22			43
> +#define QCOM_RPM_PM8058_LDO23			44
> +#define QCOM_RPM_PM8058_LDO24			45
> +#define QCOM_RPM_PM8058_LDO25			46
> +#define QCOM_RPM_PM8058_LVS0			47
> +#define QCOM_RPM_PM8058_LVS1			48
> +#define QCOM_RPM_PM8058_NCP			49
> +#define QCOM_RPM_PM8058_SMPS0			50
> +#define QCOM_RPM_PM8058_SMPS1			51
> +#define QCOM_RPM_PM8058_SMPS2			52
> +#define QCOM_RPM_PM8058_SMPS3			53
> +#define QCOM_RPM_PM8058_SMPS4			54
> +#define QCOM_RPM_PM8821_LDO1			55
> +#define QCOM_RPM_PM8821_SMPS1			56
> +#define QCOM_RPM_PM8821_SMPS2			57
> +#define QCOM_RPM_PM8901_LDO0			58
> +#define QCOM_RPM_PM8901_LDO1			59
> +#define QCOM_RPM_PM8901_LDO2			60
> +#define QCOM_RPM_PM8901_LDO3			61
> +#define QCOM_RPM_PM8901_LDO4			62
> +#define QCOM_RPM_PM8901_LDO5			63
> +#define QCOM_RPM_PM8901_LDO6			64
> +#define QCOM_RPM_PM8901_LVS0			65
> +#define QCOM_RPM_PM8901_LVS1			66
> +#define QCOM_RPM_PM8901_LVS2			67
> +#define QCOM_RPM_PM8901_LVS3			68
> +#define QCOM_RPM_PM8901_MVS			69
> +#define QCOM_RPM_PM8901_SMPS0			70
> +#define QCOM_RPM_PM8901_SMPS1			71
> +#define QCOM_RPM_PM8901_SMPS2			72
> +#define QCOM_RPM_PM8901_SMPS3			73
> +#define QCOM_RPM_PM8901_SMPS4			74
> +#define QCOM_RPM_PM8921_CLK1			75
> +#define QCOM_RPM_PM8921_CLK2			76
> +#define QCOM_RPM_PM8921_LDO1			77
> +#define QCOM_RPM_PM8921_LDO2			78
> +#define QCOM_RPM_PM8921_LDO3			79
> +#define QCOM_RPM_PM8921_LDO4			80
> +#define QCOM_RPM_PM8921_LDO5			81
> +#define QCOM_RPM_PM8921_LDO6			82
> +#define QCOM_RPM_PM8921_LDO7			83
> +#define QCOM_RPM_PM8921_LDO8			84
> +#define QCOM_RPM_PM8921_LDO9			85
> +#define QCOM_RPM_PM8921_LDO10			86
> +#define QCOM_RPM_PM8921_LDO11			87
> +#define QCOM_RPM_PM8921_LDO12			88
> +#define QCOM_RPM_PM8921_LDO13			89
> +#define QCOM_RPM_PM8921_LDO14			90
> +#define QCOM_RPM_PM8921_LDO15			91
> +#define QCOM_RPM_PM8921_LDO16			92
> +#define QCOM_RPM_PM8921_LDO17			93
> +#define QCOM_RPM_PM8921_LDO18			94
> +#define QCOM_RPM_PM8921_LDO19			95
> +#define QCOM_RPM_PM8921_LDO20			96
> +#define QCOM_RPM_PM8921_LDO21			97
> +#define QCOM_RPM_PM8921_LDO22			98
> +#define QCOM_RPM_PM8921_LDO23			99
> +#define QCOM_RPM_PM8921_LDO24			100
> +#define QCOM_RPM_PM8921_LDO25			101
> +#define QCOM_RPM_PM8921_LDO26			102
> +#define QCOM_RPM_PM8921_LDO27			103
> +#define QCOM_RPM_PM8921_LDO28			104
> +#define QCOM_RPM_PM8921_LDO29			105
> +#define QCOM_RPM_PM8921_LVS1			106
> +#define QCOM_RPM_PM8921_LVS2			107
> +#define QCOM_RPM_PM8921_LVS3			108
> +#define QCOM_RPM_PM8921_LVS4			109
> +#define QCOM_RPM_PM8921_LVS5			110
> +#define QCOM_RPM_PM8921_LVS6			111
> +#define QCOM_RPM_PM8921_LVS7			112
> +#define QCOM_RPM_PM8921_MVS			113
> +#define QCOM_RPM_PM8921_NCP			114
> +#define QCOM_RPM_PM8921_SMPS1			115
> +#define QCOM_RPM_PM8921_SMPS2			116
> +#define QCOM_RPM_PM8921_SMPS3			117
> +#define QCOM_RPM_PM8921_SMPS4			118
> +#define QCOM_RPM_PM8921_SMPS5			119
> +#define QCOM_RPM_PM8921_SMPS6			120
> +#define QCOM_RPM_PM8921_SMPS7			121
> +#define QCOM_RPM_PM8921_SMPS8			122
> +#define QCOM_RPM_PXO_CLK			123
> +#define QCOM_RPM_QDSS_CLK			124
> +#define QCOM_RPM_SFPB_CLK			125
> +#define QCOM_RPM_SMI_CLK			126
> +#define QCOM_RPM_SYS_FABRIC_ARB			127
> +#define QCOM_RPM_SYS_FABRIC_CLK			128
> +#define QCOM_RPM_SYS_FABRIC_HALT		129
> +#define QCOM_RPM_SYS_FABRIC_IOCTL		130
> +#define QCOM_RPM_SYS_FABRIC_MODE		131
> +#define QCOM_RPM_USB_OTG_SWITCH			132
> +#define QCOM_RPM_VDDMIN_GPIO			133
> +
> +/*
> + * Constants used to select force mode for regulators.
> + */
> +#define QCOM_RPM_FORCE_MODE_NONE		0
> +#define QCOM_RPM_FORCE_MODE_LPM			1
> +#define QCOM_RPM_FORCE_MODE_HPM			2
> +#define QCOM_RPM_FORCE_MODE_AUTO		3
> +#define QCOM_RPM_FORCE_MODE_BYPASS		4
> +
> +#endif

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list