[PATCHv4 0/2] Driver for TI tlc591xx 8/16 Channel i2c LED driver
Andrew Lunn
andrew at lunn.ch
Tue Jan 20 08:45:40 PST 2015
This patchset is a driver for the TI tlc59116 16 Channel i2c LED
driver and tlc59108 8 Channel i2c LED driver. This driver is used on
the Belkin WRT1900AC access point and the C code is derived from code
Belkin contributed to OpenWRT. However it has been extensively
re-written, and a device tree binding added to replace platform data.
Cc: Matthew.Fatheree at belkin.com
Since v3:
Generalized and added support for tlc59108
brightness == 0 and brightness == LED_FULL disable PWM and used
fixed OFF/ON mode
Since v2:
Remove incorrect /* Mode register ? */ comment
Parenthesis around the macro arguments
Converted many signed variables into unsigned
Saved an initialization
Since v1:
s/uint8_t/u8/g
Remove empty line
Removed #gpio-cells
Added select REGMAP_I2C
Sorted #includes into alphabetic order
Added missing MODULE_DEVICE_TABLE(of, ...)
Check return value of regmap_write()
Simplified tlc59116_set_mode()
Andrew Lunn (2):
leds: tlc59116: Document binding for the TI 16 Channel i2c LED driver
leds: tlc59116: Driver for the TI 16 Channel i2c LED driver
.../devicetree/bindings/leds/leds-tlc59116.txt | 41 ++++
drivers/leds/Kconfig | 7 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-tlc59116.c | 253 +++++++++++++++++++++
4 files changed, 302 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
create mode 100644 drivers/leds/leds-tlc59116.c
--
2.1.3
More information about the linux-arm-kernel
mailing list