[PATCH v5 4/5] mfd/regulator: dt-bindings: max77686: Document gpio properties

[Krzysztof Kozlowski]

On wto, 2015-01-20 at 13:41 +0000, Lee Jones wrote:
> On Mon, 05 Jan 2015, Krzysztof Kozlowski wrote:
> 
> > Document usage of maxim,ena-gpios properties which turn on external/GPIO
> > control over regulator.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> > ---
> >  Documentation/devicetree/bindings/mfd/max77686.txt | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
> > index 75fdfaf41831..e39f0bc1f55e 100644
> > --- a/Documentation/devicetree/bindings/mfd/max77686.txt
> > +++ b/Documentation/devicetree/bindings/mfd/max77686.txt
> > @@ -39,6 +39,12 @@ to get matched with their hardware counterparts as follow:
> >  	-BUCKn	:	1-4.
> >    Use standard regulator bindings for it ('regulator-off-in-suspend').
> >  
> > +  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
> > +  control. To turn this feature on this property must be added to the regulator
> > +  sub-node:
> > +	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
> > +				flags are actually ignored and always
> > +				ACTIVE_HIGH is used)
> 
> How does this differ to the 'enable-gpio' property which has already
> been defined?

Strictly speaking - no difference, just a GPIO specifier.

However the 'enable-gpio' property exists only for gpio-regulator. The
regulator core does not support generic enable-gpio property and each
driver implements it on its own.

Anyway Mark Brown already applied this patch to his regulator tree.

Best regards,
Krzysztof

> 
> >  Example:
> >  
> > @@ -65,4 +71,12 @@ Example:
> >  				regulator-always-on;
> >  				regulator-boot-on;
> >  			};
> > +
> > +			buck9_reg {
> > +				regulator-compatible = "BUCK9";
> > +				regulator-name = "CAM_ISP_CORE_1.2V";
> > +				regulator-min-microvolt = <1000000>;
> > +				regulator-max-microvolt = <1200000>;
> > +				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
> > +			};
> >  	}
>