[PATCH 5/9] ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller node

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Jan 20 05:04:02 PST 2015


Hi Geert,

Thank you for the patch.

On Tuesday 20 January 2015 13:51:42 Geert Uytterhoeven wrote:
> Add a node for the Bus State Controller (BSC) on r8a73a4, to which
> multiple external devices can be connected.
> 
> The BSC is driven by the ZB clock, and located in PM domain C4.
> A reference to the latter will be added later.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> Tested-by: Ulrich Hecht <ulrich.hecht+renesas at gmail.com>

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> v3:
>   - Add Tested-by,
>   - Move "ranges" before "reg",
> 
> v2:
>   - New.
> ---
>  arch/arm/boot/dts/r8a73a4.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
> index fdcca5d0fb61f0bc..6e59602307e14d8b 100644
> --- a/arch/arm/boot/dts/r8a73a4.dtsi
> +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> @@ -409,6 +409,15 @@
>  		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>  	};
> 
> +	bsc: bus at fec10000 {
> +		compatible = "renesas,bsc-r8a73a4", "renesas,bsc", "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0x20000000>;
> +		reg = <0 0xfec10000 0 0x400>;
> +		clocks = <&zb_clk>;
> +	};
> +
>  	clocks {
>  		#address-cells = <2>;
>  		#size-cells = <2>;

-- 
Regards,

Laurent Pinchart




More information about the linux-arm-kernel mailing list