[PATCH 6/9] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC

[Laurent Pinchart]

Hi Geert,

Thank you for the patch.

On Tuesday 20 January 2015 13:51:43 Geert Uytterhoeven wrote:
> Move the Ethernet node from the ad-hoc lbsc node to the BSC node,
> as its connected to the Bus State Controller.  This allows the system to
> know the right position of the Ethernet node in the clock and PM domain
> hierarchy, and manage the clock and PM domain appropriately.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> Tested-by: Ulrich Hecht <ulrich.hecht+renesas at gmail.com>

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> v3:
>   - Add Tested-by,
> 
> v2:
>   - New.
> ---
>  arch/arm/boot/dts/r8a73a4-ape6evm.dts | 35
> +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20
> deletions(-)
> 
> diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
> b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index
> 0d50bef0123449f5..44c4cac1820a4dfe 100644
> --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
> +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
> @@ -72,26 +72,6 @@
>  		regulator-always-on;
>  	};
> 
> -	lbsc {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		ranges = <0 0 0 0x20000000>;
> -
> -		ethernet at 8000000 {
> -			compatible = "smsc,lan9220", "smsc,lan9115";
> -			reg = <0x08000000 0x1000>;
> -			interrupt-parent = <&irqc1>;
> -			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> -			phy-mode = "mii";
> -			reg-io-width = <4>;
> -			smsc,irq-active-high;
> -			smsc,irq-push-pull;
> -			vdd33a-supply = <&ape6evm_fixed_3v3>;
> -			vddvario-supply = <&ape6evm_fixed_1v8>;
> -		};
> -	};
> -
>  	leds {
>  		compatible = "gpio-leds";
>  		led1 {
> @@ -184,6 +164,21 @@
>  	voltage-tolerance = <1>; /* 1% */
>  };
> 
> +&bsc {
> +	ethernet at 8000000 {
> +		compatible = "smsc,lan9220", "smsc,lan9115";
> +		reg = <0x08000000 0x1000>;
> +		interrupt-parent = <&irqc1>;
> +		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> +		phy-mode = "mii";
> +		reg-io-width = <4>;
> +		smsc,irq-active-high;
> +		smsc,irq-push-pull;
> +		vdd33a-supply = <&ape6evm_fixed_3v3>;
> +		vddvario-supply = <&ape6evm_fixed_1v8>;
> +	};
> +};
> +
>  &cmt1 {
>  	status = "okay";
>  };

-- 
Regards,

Laurent Pinchart