[PATCH net-next v2 1/1] ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy address

[Fugang Duan]

The commit (3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The cause is
the commit add mdio node with un-correct phy address.

The patch just correct i.MX6sx sdb board enet phy address.

V2:
* As Shawn's suggestion that unit-address should match 'reg' property, so
  update ethernet-phy unit-address.

Acked-by: Stefan Agner <stefan at agner.ch>
Signed-off-by: Fugang Duan <B38611 at freescale.com>
---
 arch/arm/boot/dts/imx6sx-sdb.dts |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 8c1febd..c108bb4 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -166,12 +166,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy1: ethernet-phy at 0 {
-			reg = <0>;
+		ethphy1: ethernet-phy at 1 {
+			reg = <1>;
 		};
 
-		ethphy2: ethernet-phy at 1 {
-			reg = <1>;
+		ethphy2: ethernet-phy at 2 {
+			reg = <2>;
 		};
 	};
 };
-- 
1.7.8