[PATCH 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

Wenyou Yang wenyou.yang at atmel.com
Tue Jan 20 00:16:55 PST 2015


From: Peter Rosin <peda at axentia.se>

The DDRSDR controller fails miserably to put LPDDR1 memories in
self-refresh. Force the controller to think it has DDR2 memories
during the self-refresh period, as the DDR2 self-refresh spec is
equivalent to LPDDR1, and is correctly implemented in the
controller.

Assume that the second controller has the same fault, but that is
untested.

Signed-off-by: Peter Rosin <peda at axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
 arch/arm/mach-at91/pm_slowclock.S  |   43 +++++++++++++++++++++++++++++++-----
 include/soc/at91/at91sam9_ddrsdr.h |    2 +-
 2 files changed, 39 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 3d497c7..5859f42 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -99,6 +99,16 @@ ddr_sr_enable:
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_sr_enable
 
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	str	tmp1, .saved_sam9_mdr
+	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
+	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
+	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+
 	/* prepare for DDRAM self-refresh mode */
 	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 	str	tmp1, .saved_sam9_lpr
@@ -107,14 +117,26 @@ ddr_sr_enable:
 
 	/* figure out if we use the second ram controller */
 	cmp	ramc1, #0
-	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-	strne	tmp2, .saved_sam9_lpr1
-	bicne	tmp2, #AT91_DDRSDRC_LPCB
-	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	beq	ddr_no_2nd_ctrl
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	str	tmp2, .saved_sam9_mdr1
+	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
+	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
+	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	str	tmp2, .saved_sam9_lpr1
+	bic	tmp2, #AT91_DDRSDRC_LPCB
+	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 
 	/* Enable DDRAM self-refresh mode */
+	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ddr_no_2nd_ctrl:
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
 	b	sdr_sr_done
 
@@ -226,12 +248,17 @@ sdr_sr_done:
 	 */
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_en_restore
+	/* Restore MDR in case of LPDDR1 */
+	ldr	tmp1, .saved_sam9_mdr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
 	/* Restore LPR on AT91 with DDRAM */
 	ldr	tmp1, .saved_sam9_lpr
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 
 	/* if we use the second ram controller */
 	cmp	ramc1, #0
+	ldrne	tmp2, .saved_sam9_mdr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
 	ldrne	tmp2, .saved_sam9_lpr1
 	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
@@ -262,5 +289,11 @@ ram_restored:
 .saved_sam9_lpr1:
 	.word 0
 
+.saved_sam9_mdr:
+	.word 0
+
+.saved_sam9_mdr1:
+	.word 0
+
 ENTRY(at91_slow_clock_sz)
 	.word .-at91_slow_clock
diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h
index 0210797..dc10c52 100644
--- a/include/soc/at91/at91sam9_ddrsdr.h
+++ b/include/soc/at91/at91sam9_ddrsdr.h
@@ -92,7 +92,7 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define		AT91_DDRSDRC_MD		(7 << 0)	/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list