[PATCH v2] ARM: dts: imx6q: enable dma for ecspi5

[Shawn Guo]

On Tue, Jan 13, 2015 at 07:04:08PM +0100, Anton Bondarenko wrote:
> Enable dma support for ecspi5 controller
> 
> Signed-off-by: Anton Bondarenko <anton_bondarenko at mentor.com>

Applied, thanks.

> ---
>  arch/arm/boot/dts/imx6q.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index 37ee4e5..93ec79b 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -95,6 +95,8 @@
>  					clocks = <&clks IMX6Q_CLK_ECSPI5>,
>  						 <&clks IMX6Q_CLK_ECSPI5>;
>  					clock-names = "ipg", "per";
> +					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
> +					dma-names = "rx", "tx";
>  					status = "disabled";
>  				};
>  			};
> -- 
> 2.2.1
>