[PATCHv3 1/2] usb: ehci-platform: add support for multiple phys per controller
arun.ramamurthy at broadcom.com
arun.ramamurthy at broadcom.com
Mon Jan 19 16:05:29 PST 2015
From: Arun Ramamurthy <arunrama at broadcom.com>
Added support for cases where one controller is connected
to multiple phys.
Signed-off-by: Arun Ramamurthy <arunrama at broadcom.com>
Reviewed-by: Ray Jui <rjui at broadcom.com>
Reviewed-by: Scott Branden <sbranden at broadcom.com>
Tested-by: Scott Branden <sbranden at broadcom.com>
---
drivers/usb/host/ehci-platform.c | 82 +++++++++++++++++++++++++++++-----------
1 file changed, 60 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 8557803..6b4978a 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -43,7 +43,8 @@
struct ehci_platform_priv {
struct clk *clks[EHCI_MAX_CLKS];
struct reset_control *rst;
- struct phy *phy;
+ struct phy **phys;
+ int num_phys;
};
static const char hcd_name[] = "ehci-platform";
@@ -78,7 +79,7 @@ static int ehci_platform_power_on(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
- int clk, ret;
+ int clk, ret, phy_num;
for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) {
ret = clk_prepare_enable(priv->clks[clk]);
@@ -86,20 +87,28 @@ static int ehci_platform_power_on(struct platform_device *dev)
goto err_disable_clks;
}
- if (priv->phy) {
- ret = phy_init(priv->phy);
- if (ret)
- goto err_disable_clks;
-
- ret = phy_power_on(priv->phy);
- if (ret)
- goto err_exit_phy;
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ if (priv->phys[phy_num]) {
+ ret = phy_init(priv->phys[phy_num]);
+ if (ret)
+ goto err_exit_phy;
+ ret = phy_power_on(priv->phys[phy_num]);
+ if (ret) {
+ phy_exit(priv->phys[phy_num]);
+ goto err_exit_phy;
+ }
+ }
}
return 0;
err_exit_phy:
- phy_exit(priv->phy);
+ while (--phy_num >= 0) {
+ if (priv->phys[phy_num]) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
+ }
err_disable_clks:
while (--clk >= 0)
clk_disable_unprepare(priv->clks[clk]);
@@ -111,11 +120,13 @@ static void ehci_platform_power_off(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
- int clk;
+ int clk, phy_num;
- if (priv->phy) {
- phy_power_off(priv->phy);
- phy_exit(priv->phy);
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ if (priv->phys[phy_num]) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
}
for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
@@ -143,7 +154,8 @@ static int ehci_platform_probe(struct platform_device *dev)
struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ehci_platform_priv *priv;
struct ehci_hcd *ehci;
- int err, irq, clk = 0;
+ const char *phy_name;
+ int err, irq, phy_num, clk = 0;
if (usb_disabled())
return -ENODEV;
@@ -185,12 +197,38 @@ static int ehci_platform_probe(struct platform_device *dev)
if (of_property_read_bool(dev->dev.of_node, "big-endian"))
ehci->big_endian_mmio = ehci->big_endian_desc = 1;
- priv->phy = devm_phy_get(&dev->dev, "usb");
- if (IS_ERR(priv->phy)) {
- err = PTR_ERR(priv->phy);
- if (err == -EPROBE_DEFER)
- goto err_put_hcd;
- priv->phy = NULL;
+ priv->num_phys = of_count_phandle_with_args(dev->dev.of_node,
+ "phys", "#phy-cells");
+ priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1;
+
+ priv->phys = devm_kcalloc(&dev->dev, priv->num_phys,
+ sizeof(struct phy *), GFP_KERNEL);
+ if (!priv->phys)
+ return -ENOMEM;
+
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ err = of_property_read_string_index(
+ dev->dev.of_node,
+ "phy-names", phy_num,
+ &phy_name);
+
+ if (err < 0) {
+ if (priv->num_phys > 1) {
+ dev_err(&dev->dev, "phy-names not provided");
+ goto err_put_hcd;
+ } else
+ phy_name = "usb";
+ }
+
+ priv->phys[phy_num] = devm_phy_get(&dev->dev,
+ phy_name);
+ if (IS_ERR(priv->phys[phy_num])) {
+ err = PTR_ERR(priv->phys[phy_num]);
+ if ((priv->num_phys > 1) ||
+ (err == -EPROBE_DEFER))
+ goto err_put_hcd;
+ priv->phys[phy_num] = NULL;
+ }
}
for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
--
2.2.2
More information about the linux-arm-kernel
mailing list