[PATCH v3 2/8] mfd: Add atmel-st driver
Alexandre Belloni
alexandre.belloni at free-electrons.com
Mon Jan 19 14:59:23 PST 2015
Hi Lee,
On 19/01/2015 at 09:42:24 +0000, Lee Jones wrote :
> On Mon, 12 Jan 2015, Alexandre Belloni wrote:
>
> > The Atmel System Timer IP available on the at91rm9200 exposes both a timer and a
> > watchdog.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> > Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> > ---
> > drivers/mfd/Kconfig | 7 ++++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/atmel-st.c | 77 ++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/atmel-st.h | 47 +++++++++++++++++++++++++++
> > 4 files changed, 132 insertions(+)
> > create mode 100644 drivers/mfd/atmel-st.c
> > create mode 100644 include/linux/mfd/atmel-st.h
>
> This driver looks pretty pointless. Why can't you request the sysconf
> registers from within the drivers themselves?
>
How would you probe the watchdog driver then? Would you had the
"atmel,at91rm9200-st" compatible there?
At some point in time, we should add the reset driver, would you also
match it on "atmel,at91rm9200-st"?
I'm fine with that as this allows to avoid the mfd driver.
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 2e6b7311fabc..3c5185c0cf06 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -78,6 +78,13 @@ config MFD_BCM590XX
> > help
> > Support for the BCM590xx PMUs from Broadcom
> >
> > +config MFD_ATMEL_ST
> > + bool "Atmel System Timer"
> > + select MFD_CORE
> > + default SOC_AT91RM9200
> > + help
> > + If you say Y here you get support for the Atmel System Timer.
> > +
> > config MFD_AXP20X
> > bool "X-Powers AXP20X"
> > select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 53467e211381..1ecd416f25c5 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -104,6 +104,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
> > obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
> > obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
> > obj-$(CONFIG_MFD_AXP20X) += axp20x.o
> > +obj-$(CONFIG_MFD_ATMEL_ST) += atmel-st.o
> >
> > obj-$(CONFIG_MFD_LP3943) += lp3943.o
> > obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
> > diff --git a/drivers/mfd/atmel-st.c b/drivers/mfd/atmel-st.c
> > new file mode 100644
> > index 000000000000..54106fcfe898
> > --- /dev/null
> > +++ b/drivers/mfd/atmel-st.c
> > @@ -0,0 +1,77 @@
> > +/*
> > + * Copyright (C) 2014 Free Electrons
> > + * Copyright (C) 2014 Atmel
> > + *
> > + * Author: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License version 2 as published by
> > + * the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along with
> > + * this program. If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include <linux/mfd/atmel-st.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +
> > +static const struct mfd_cell atmel_st_cells[] = {
> > + {
> > + .name = "atmel_st_timer",
> > + },
> > + {
> > + .name = "atmel_st_watchdog",
> > + },
> > +};
> > +
> > +static int atmel_st_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct regmap *regmap_st;
> > +
> > + regmap_st = syscon_node_to_regmap(dev->of_node);
> > + if (IS_ERR(regmap_st))
> > + return PTR_ERR(regmap_st);
> > + dev_set_drvdata(dev, regmap_st);
> > +
> > + return mfd_add_devices(dev, -1, atmel_st_cells,
> > + ARRAY_SIZE(atmel_st_cells),
> > + NULL, 0, NULL);
> > +}
> > +
> > +static int atmel_st_remove(struct platform_device *pdev)
> > +{
> > + mfd_remove_devices(&pdev->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id atmel_st_match[] = {
> > + { .compatible = "atmel,at91rm9200-st" },
> > + { /* sentinel */ },
> > +};
> > +
> > +static struct platform_driver atmel_st_driver = {
> > + .probe = atmel_st_probe,
> > + .remove = atmel_st_remove,
> > + .driver = {
> > + .name = "atmel-system-timer",
> > + .owner = THIS_MODULE,
> > + .of_match_table = atmel_st_match,
> > + },
> > +};
> > +module_platform_driver(atmel_st_driver);
> > +
> > +MODULE_ALIAS("platform:atmel-st");
> > +MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni at free-electrons.com>");
> > +MODULE_DESCRIPTION("Atmel ST (System Timer) driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/mfd/atmel-st.h b/include/linux/mfd/atmel-st.h
> > new file mode 100644
> > index 000000000000..88c6cf8eeb2b
> > --- /dev/null
> > +++ b/include/linux/mfd/atmel-st.h
> > @@ -0,0 +1,47 @@
> > +/*
> > + * Copyright (C) 2005 Ivan Kokshaysky
> > + * Copyright (C) SAN People
> > + *
> > + * System Timer (ST) - System peripherals registers.
> > + * Based on AT91RM9200 datasheet revision E.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#ifndef __LINUX_MFD_ATMEL_ST_H
> > +#define __LINUX_MFD_ATMEL_ST_H
> > +
> > +#define AT91_ST_CR 0x00 /* Control Register */
> > +#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
> > +
> > +#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */
> > +#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
> > +
> > +#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */
> > +#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
> > +#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
> > +#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
> > +
> > +#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */
> > +#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
> > +
> > +#define AT91_ST_SR 0x10 /* Status Register */
> > +#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
> > +#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
> > +#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
> > +#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
> > +
> > +#define AT91_ST_IER 0x14 /* Interrupt Enable Register */
> > +#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */
> > +#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */
> > +
> > +#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */
> > +#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
> > +
> > +#define AT91_ST_CRTR 0x24 /* Current Real-time Register */
> > +#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
> > +
> > +#endif /* __LINUX_MFD_ATMEL_ST_H */
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
More information about the linux-arm-kernel
mailing list