[PATCH] ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline

[Hans de Goede]

Hi,

On 19-01-15 14:35, Hans de Goede wrote:
> Hi,
>
> On 19-01-15 14:20, Maxime Ripard wrote:
>> Hi Hans,
>>
>> On Mon, Jan 19, 2015 at 02:01:17PM +0100, Hans de Goede wrote:
>>> Testing has shown that on sun4i the display backend engine does not have
>>> deep enough fifo-s causing flickering / tearing in full-hd mode due to
>>> fifo underruns. This can be avoided by letting the display frontend engine
>>> do the dma from memory, and then letting it feed the data directly into
>>> the backend unmodified, as the frontend does have deep enough fifo-s.
>>>
>>> Note since u-boot-v2015.01 has been released using the de_be0-lcd0-hdmi
>>> pipeline on sun4i, we need to keep that one around too (unfortunately).
>>>
>>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>>> ---
>>>   arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
>>>   1 file changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
>>> index f5e35b5..ccd60e3 100644
>>> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
>>> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
>>> @@ -44,6 +44,14 @@
>>>                    <&ahb_gates 44>;
>>>               status = "disabled";
>>>           };
>>> +
>>> +        framebuffer at 1 {
>>> +            compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
>>> +            allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
>>> +            clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
>>> +                 <&ahb_gates 44>, <&ahb_gates 46>;
>>> +            status = "disabled";
>>> +        };
>>
>> Thanks for this.
>>
>> I do have a question though, maybe I'm missing something, but what
>> would prevent us from using the existing node already? The output
>> pipeline seems to be the same, at least for which output we
>> use. Wether we use or not the display frontend looks like an
>> implementation detail.
>
> The purpose of having a node per pipeline is to have the rights clocks
> listed for the pipeline chosen. So the "de_fe0-de_be0-lcd0-hdmi" node
> has one ahb_gates entry more so as to make sure the kernel does not gate
> off the frontend.
>
> The idea of having different nodes per pipeline is that when we get
> support for more module clocks in place, as a preparation for kms
> support, we can add the module clocks to the relevant nodes, to also
> ensure the module clocks will not get turned off.
>
> By having this info in the dtb, rather then in u-boot we can update
> the clocks list as we add new clock nodes in the dtb, ensuring that
> an older u-boot will keep working as we add support for module
> clocks, etc.

Hmm, thinking more about this, and about how u-boot searches for
the simplefb node, I think that having a single node like this:

         framebuffer at 0 {
             compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
             /* This node is for de_fe0-de_be0-lcd0-hdmi, but we also declare de_be0-lcd0-hdmi
                for compatibility with u-boot-v2015.01 which does not use the frontend */
             allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi", "de_be0-lcd0-hdmi";
             clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
                  <&ahb_gates 44>, <&ahb_gates 46>;
             status = "disabled";
         };

Should work, but this will cause simplefb to enable the frontend ahb gate
even if it is not used (this will only impact u-boot-v2015.01 users), and as
such feels wrong, so I would prefer to go with my patch as is.

Regards,

Hans