[PATCH v3 1/3] ARM: dts: sun4i: Add mk802 board

[Hans de Goede]

Hi all,

Oops this series is not a v3, but rather at v1, iow this is the first posting,
sorry about that.

Regards,

Hans

On 18-01-15 13:09, Hans de Goede wrote:
> The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features
> 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle,
> mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not
> use the AXP209 pmic, it does not have a pmic at all.
>
> For more details see: http://linux-sunxi.org/Rikomagic_mk802
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>   arch/arm/boot/dts/Makefile            |   1 +
>   arch/arm/boot/dts/sun4i-a10-mk802.dts | 109 ++++++++++++++++++++++++++++++++++
>   2 files changed, 110 insertions(+)
>   create mode 100644 arch/arm/boot/dts/sun4i-a10-mk802.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7f66bab..dfb6885 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -448,6 +448,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
>   	sun4i-a10-chuwi-v7-cw0825.dtb \
>   	sun4i-a10-cubieboard.dtb \
>   	sun4i-a10-mini-xplus.dtb \
> +	sun4i-a10-mk802.dtb \
>   	sun4i-a10-hackberry.dtb \
>   	sun4i-a10-inet97fv2.dtb \
>   	sun4i-a10-olinuxino-lime.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
> new file mode 100644
> index 0000000..e9a6886
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
> @@ -0,0 +1,109 @@
> +/*
> + * Copyright 2015 Hans de Goede <hdegoede at redhat.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + *     You should have received a copy of the GNU General Public
> + *     License along with this file; if not, write to the Free
> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + *     MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun4i-a10.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "MK802";
> +	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
> +	cd-inverted;
> +	status = "okay";
> +};
> +
> +&ohci0 {
> +	status = "okay";
> +};
> +
> +&pio {
> +	usb2_vbus_pin_mk802: usb2_vbus_pin at 0 {
> +		allwinner,pins = "PH12";
> +		allwinner,function = "gpio_out";
> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +	};
> +};
> +
> +&reg_usb1_vbus {
> +	status = "okay";
> +};
> +
> +&reg_usb2_vbus {
> +	pinctrl-0 = <&usb2_vbus_pin_mk802>;
> +	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins_a>;
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	usb1_vbus-supply = <&reg_usb1_vbus>;
> +	usb2_vbus-supply = <&reg_usb2_vbus>;
> +	status = "okay";
> +};
>