[PATCH 08/11] ARM: shmobile: r8a73a4 dtsi: Add memory-controller nodes
Simon Horman
horms+renesas at verge.net.au
Fri Jan 16 16:58:41 PST 2015
From: Geert Uytterhoeven <geert+renesas at glider.be>
Add device nodes for the two DDR Bus State Controllers (DBSC).
The DBSCs are located in the A3BC PM domain, which must not be powered
down, else the system will crash.
A reference to the A3BC PM domain will be added later.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 5ac57ba..38136d9 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -38,6 +38,16 @@
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ dbsc1: memory-controller at e6790000 {
+ compatible = "renesas,dbsc-r8a73a4";
+ reg = <0 0xe6790000 0 0x10000>;
+ };
+
+ dbsc2: memory-controller at e67a0000 {
+ compatible = "renesas,dbsc-r8a73a4";
+ reg = <0 0xe67a0000 0 0x10000>;
+ };
+
dmac: dma-multiplexer {
compatible = "renesas,shdma-mux";
#dma-cells = <1>;
--
2.1.4
More information about the linux-arm-kernel
mailing list