[PATCH v2 0/8] AT91 cleanup for 3.20 #2

Nicolas Ferre nicolas.ferre at atmel.com
Fri Jan 16 09:11:23 PST 2015


Le 15/01/2015 15:59, Alexandre Belloni a écrit :
> This patch sets is based on AT91 cleanup for 3.20 #1
> and depends on AT91 DT for 3.20 #1 because it uses the added SRAM nodes.
> 
> The first two patches rework the pm code to get rid of cpu_is_xxx (they will be
> dropped soon) and use the SRAM from the genpool instead of relying on the remap
> done by at91_init_sram.
> 
> The 3rd and 4th patches a reworking the pm code further to move at91_pm_init in
> the .init_machine of the SoCs instead of arch_initcall, to get ready for
> multiplatform.
> 
> Then the following patches get rid of at91_init_sram, taking .map_io for almost
> all SoCs but the sama5d4 (more cleanups coming soon for that part).
> 
> The final patch moves at91rm9200_idle to clk/at91/pmc.c and allows to almost
> empty arch/arm/mach-at91/at91rm9200.c (It is actually empty once "Atmel System
> Timer cleanups" is applied).
> 
> Changes in v2:
>  - added patch 3 and 4 to remove the calls to of_machine_is_compatible()
> 
> Alexandre Belloni (8):
>   ARM: at91: pm: rework cpu detection
>   ARM: at91: pm: use the mmio-sram pool to access SRAM
>   ARM: at91: pm: add UDP and UHP checks to newer SoCs
>   ARM: at91: pm: prepare for multiplatform
>   ARM: at91: remove useless map_io
>   ARM: at91: sama5d4: remove useless call to at91_init_sram
>   ARM: at91: remove unused at91_init_sram
>   ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c

Okay for the whole series. I'm looking forward including the upcoming
one as well.

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

All stacked on top of at91-3.20-cleanup.

Thanks, bye.


>  arch/arm/mach-at91/Kconfig           |   1 +
>  arch/arm/mach-at91/at91rm9200.c      |  15 -----
>  arch/arm/mach-at91/at91sam9260.c     |  27 ---------
>  arch/arm/mach-at91/at91sam9261.c     |   9 ---
>  arch/arm/mach-at91/at91sam9263.c     |   7 ---
>  arch/arm/mach-at91/at91sam9g45.c     |   7 ---
>  arch/arm/mach-at91/at91sam9n12.c     |   6 --
>  arch/arm/mach-at91/at91sam9rl.c      |  18 ------
>  arch/arm/mach-at91/at91sam9x5.c      |   6 --
>  arch/arm/mach-at91/board-dt-rm9200.c |  11 ++++
>  arch/arm/mach-at91/board-dt-sam9.c   |  27 +++++++++
>  arch/arm/mach-at91/board-dt-sama5.c  |   1 +
>  arch/arm/mach-at91/generic.h         |  15 ++++-
>  arch/arm/mach-at91/pm.c              | 110 ++++++++++++++++++++++++++---------
>  arch/arm/mach-at91/sama5d3.c         |   6 --
>  arch/arm/mach-at91/sama5d4.c         |   1 -
>  arch/arm/mach-at91/setup.c           |  20 -------
>  drivers/clk/at91/pmc.c               |   9 +++
>  18 files changed, 146 insertions(+), 150 deletions(-)
> 


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list