[PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port

[Mark Brown]

On Fri, Jan 16, 2015 at 03:27:00PM +0100, Gregory CLEMENT wrote:
> On 16/01/2015 13:37, Mark Brown wrote:

> > regulator-always-on is a bit fuzzy for suspend, if the regulator has
> > suspend control it'll kick in - it's really about the Linux refcounting
> > while it's running.  What's more concerning here is that the quick
> > sample of the regulators flagged as always on like the above that I
> > looked at in the patch don't seem to have any enable control in the DT
> > so this will have absolutely no effect.

> Actually the reg_sata[0-4] are controlled by gpio, so there is a mean
> to enable/disable them. For the reg_5v_sata[0-4] and reg_12v_sata[0-4]
> they depend on their respective reg_sata and I just propagated the
> regulator-always-on, this was maybe a mistake.

It certainly makes everything confusing if you have control related
stuff on regulators that are not directly controllable.

> >> It is probably a good idea to use regulator-boot-on and
> >> then test things this way, and if that works use
> >> regulator-boot-on.

> > No, it's unlikely that boot-on makes sense here - it's there for cases
> > where we can't read back the hardware state at power on.  Generally
> > drivers should work regardless of the initial state of the regulator
> > (and modular drivers will actually break if they try to rely on boot-on
> > since we clean up unused regulators at boot).

> As pointed by Hans my concern here was be sure that during boot the disk
> are not power off. In this case which property would be accurate?

None, the core won't do anything with the regulator until the end of
init anyway.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150116/291ff5cd/attachment.sig>