[PATCH 13/17] ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
Simon Horman
horms+renesas at verge.net.au
Thu Jan 15 18:35:25 PST 2015
From: Magnus Damm <damm+renesas at opensource.se>
Sync the two DTS for the KZM9G board. The target is the file
"sh73a0-kzm9g.dts" and it is made identical to the DT reference
case with the exception of the compatbile string. In the future
the DT reference file will go away.
Signed-off-by: Magnus Damm <damm+renesas at opensource.se>
[geert: Update for recent changes to sh73a0-kzm9g-reference.dts]
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g.dts | 374 ++++++++++++++++++++++++++++++++++++-
1 file changed, 373 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index e7dae01..6f00e6b 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -1,6 +1,9 @@
/*
* Device Tree Source for the KZM-A9-GT board
*
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
@@ -10,17 +13,386 @@
/dts-v1/;
#include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g", "renesas,sh73a0";
+ aliases {
+ serial4 = &scifa4;
+ };
+
+ cpus {
+ cpu at 0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1196000 1315000
+ 598000 1175000
+ 398667 1065000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+ };
+ };
+
chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+ bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ stdout-path = &scifa4;
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ reg_1p8v: regulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator at 1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmc_sdhi0: regulator at 2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vmmc_sdhi2: regulator at 3 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lan9220 at 10000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x10000000 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&irqpin0>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ smsc,save-mac-address;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ label = "LED1";
+ };
+ led2 {
+ gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ label = "LED2";
+ };
+ led3 {
+ gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ label = "LED3";
+ };
+ led4 {
+ gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ label = "LED4";
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ back-key {
+ gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "SW3";
+ };
+
+ right-key {
+ gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RIGHT>;
+ label = "SW2-R";
+ };
+
+ left-key {
+ gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFT>;
+ label = "SW2-L";
+ };
+
+ enter-key {
+ gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ label = "SW2-P";
+ };
+
+ up-key {
+ gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ label = "SW2-U";
+ };
+
+ down-key {
+ gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ label = "SW2-D";
+ };
+
+ home-key {
+ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "SW1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&ak4648>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <11289600>;
+ };
+ };
+};
+
+&cmt1 {
+ status = "okay";
+};
+
+&extal2_clk {
+ clock-frequency = <48000000>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ compass at c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ ak4648: codec at 12 {
+ compatible = "asahi-kasei,ak4648";
+ reg = <0x12>;
+ #sound-dai-cells = <0>;
+ };
+
+ accelerometer at 1d {
+ compatible = "adi,adxl34x";
+ reg = <0x1d>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rtc at 32 {
+ compatible = "ricoh,r2025sd";
+ reg = <0x32>;
+ };
+
+ as3711 at 40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ vdd_dvfs: sd1 {
+ regulator-name = "1.315V CPU";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd2 {
+ regulator-name = "1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo3 {
+ regulator-name = "3.0V CPU";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo4 {
+ regulator-name = "2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo5 {
+ regulator-name = "2.8V #2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo7 {
+ regulator-name = "1.15V CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo8 {
+ regulator-name = "1.15V CPU #2";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ touchscreen at 55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupt-parent = <&irqpin1>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcf8575: gpio at 20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ interrupt-parent = <&irqpin2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ vmmc-supply = <®_1p8v>;
+ status = "okay";
+};
+
+&pfc {
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmc {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: serial4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+ "fsia_data_in", "fsia_data_out";
+ renesas,function = "fsia";
+ };
+};
+
+&scifa4 {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi0>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi2>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
--
2.1.4
More information about the linux-arm-kernel
mailing list