[PATCH 17/17] ARM: at91: remove at91_dt_initialize
Alexandre Belloni
alexandre.belloni at free-electrons.com
Thu Jan 15 13:58:20 PST 2015
Move the ramc initialization to pm.c as it is the only user left. This allows to
get rid of at91_dt_initialize() and setup.c
Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
arch/arm/mach-at91/Makefile | 2 --
arch/arm/mach-at91/at91rm9200.c | 1 -
arch/arm/mach-at91/at91sam9.c | 2 --
arch/arm/mach-at91/generic.h | 3 --
arch/arm/mach-at91/pm.c | 43 ++++++++++++++++++++++++++-
arch/arm/mach-at91/sama5d3.c | 1 -
arch/arm/mach-at91/sama5d4.c | 1 -
arch/arm/mach-at91/setup.c | 64 -----------------------------------------
8 files changed, 42 insertions(+), 75 deletions(-)
delete mode 100644 arch/arm/mach-at91/setup.c
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 27b503defe80..be26bb8c9a9a 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
-obj-y := setup.o
-
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index a1d1e63fb405..4ab2e2bbdee2 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -41,7 +41,6 @@ static void __init rm9200_dt_device_init(void)
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91_rm9200_pm_init();
- at91_dt_initialize();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index 0aeabcf4ddb8..8223b1298510 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -19,7 +19,6 @@ static void __init sam9_dt_device_init(void)
{
arm_pm_idle = at91sam9_idle;
at91_sam9260_pm_init();
- at91_dt_initialize();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -39,7 +38,6 @@ static void __init sam9g45_dt_device_init(void)
{
arm_pm_idle = at91sam9_idle;
at91_sam9g45_pm_init();
- at91_dt_initialize();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 881e73a27fab..1384354e93dc 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,9 +14,6 @@
#include <linux/of.h>
#include <linux/reboot.h>
- /* Processors */
-extern void __init at91_dt_initialize(void);
-
/* Timer */
extern void at91rm9200_timer_init(void);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 11bf992838af..4aebd7ba7640 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -44,6 +44,7 @@ static struct {
} at91_pm_data;
static void (*at91_pm_standby)(void);
+static void __iomem *at91_ramc_base[2];
static int at91_pm_valid_state(suspend_state_t state)
{
@@ -227,6 +228,44 @@ void at91_pm_set_standby(void (*at91_standby)(void))
}
}
+
+static struct of_device_id ramc_ids[] = {
+ { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
+ { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
+ { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
+ { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+ { /*sentinel*/ }
+};
+
+static void at91_dt_ramc(void)
+{
+ struct device_node *np;
+ const struct of_device_id *of_id;
+ int idx = 0;
+ const void *standby = NULL;
+
+ for_each_matching_node_and_match(np, ramc_ids, &of_id) {
+ at91_ramc_base[idx] = of_iomap(np, 0);
+ if (!at91_ramc_base[idx])
+ panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+
+ if (!standby)
+ standby = of_id->data;
+
+ idx++;
+ }
+
+ if (!idx)
+ panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+
+ if (!standby) {
+ pr_warn("ramc no standby function available\n");
+ return;
+ }
+
+ at91_pm_set_standby(standby);
+}
+
#ifdef CONFIG_AT91_SLOW_CLOCK
static void __init at91_pm_sram_init(void)
{
@@ -268,7 +307,6 @@ put_node:
}
#endif
-
static void __init at91_pm_init(void)
{
#ifdef CONFIG_AT91_SLOW_CLOCK
@@ -288,6 +326,7 @@ void __init at91_rm9200_pm_init(void)
/*
* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
*/
+ at91_dt_ramc();
at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
@@ -298,6 +337,7 @@ void __init at91_rm9200_pm_init(void)
void __init at91_sam9260_pm_init(void)
{
+ at91_dt_ramc();
at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
return at91_pm_init();
@@ -305,6 +345,7 @@ void __init at91_sam9260_pm_init(void)
void __init at91_sam9g45_pm_init(void)
{
+ at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
return at91_pm_init();
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index 752d1612ff1f..3af2b4bcc205 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -16,7 +16,6 @@
static void __init sama5_dt_device_init(void)
{
at91_sam9260_pm_init();
- at91_dt_initialize();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-at91/sama5d4.c b/arch/arm/mach-at91/sama5d4.c
index 2f1ee08dc49f..2ec43ee3f440 100644
--- a/arch/arm/mach-at91/sama5d4.c
+++ b/arch/arm/mach-at91/sama5d4.c
@@ -52,7 +52,6 @@ static void __init sama5d4_map_io(void)
static void __init sama5d4_dt_device_init(void)
{
at91_sam9260_pm_init();
- at91_dt_initialize();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
deleted file mode 100644
index 4036e3e0ff96..000000000000
--- a/arch/arm/mach-at91/setup.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#define pr_fmt(fmt) "AT91: " fmt
-
-#include <linux/io.h>
-#include <linux/pm.h>
-#include <linux/of_address.h>
-
-#include <asm/system_misc.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-#include "pm.h"
-
-void __iomem *at91_ramc_base[2];
-EXPORT_SYMBOL_GPL(at91_ramc_base);
-
-static struct of_device_id ramc_ids[] = {
- { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
- { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
- { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
- { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
- { /*sentinel*/ }
-};
-
-static void at91_dt_ramc(void)
-{
- struct device_node *np;
- const struct of_device_id *of_id;
- int idx = 0;
- const void *standby = NULL;
-
- for_each_matching_node_and_match(np, ramc_ids, &of_id) {
- at91_ramc_base[idx] = of_iomap(np, 0);
- if (!at91_ramc_base[idx])
- panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
-
- if (!standby)
- standby = of_id->data;
-
- idx++;
- }
-
- if (!idx)
- panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
-
- if (!standby) {
- pr_warn("ramc no standby function available\n");
- return;
- }
-
- at91_pm_set_standby(standby);
-}
-
-void __init at91_dt_initialize(void)
-{
- at91_dt_ramc();
-}
--
2.1.0
More information about the linux-arm-kernel
mailing list