[PATCH 10/17] ARM: at91: merge SOC_AT91SAM9xxx

[Alexandre Belloni]

Only use SOC_AT91SAM9 for all the at91sam9 SoCs.

It enables HAVE_AT91_SMD and HAVE_AT91_UTMI for all the sam9 SoCs but this only
represents 96 bytes of uncompressed kernel code.

Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
 arch/arm/configs/at91_dt_defconfig | 10 +----
 arch/arm/mach-at91/Kconfig         | 92 +++++++++++---------------------------
 2 files changed, 27 insertions(+), 75 deletions(-)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 8116d122e098..811e72bbe642 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -15,15 +15,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
-CONFIG_SOC_AT91SAM9260=y
-CONFIG_SOC_AT91SAM9261=y
-CONFIG_SOC_AT91SAM9263=y
-CONFIG_SOC_AT91SAM9RL=y
-CONFIG_SOC_AT91SAM9G45=y
-CONFIG_SOC_AT91SAM9X5=y
-CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91RM9200_DT=y
-CONFIG_MACH_AT91SAM9_DT=y
+CONFIG_SOC_AT91SAM9=y
 CONFIG_AT91_TIMER_HZ=128
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c6956b863b9d..c6740e359a44 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -16,15 +16,6 @@ config HAVE_AT91_SMD
 config HAVE_AT91_H32MX
 	bool
 
-config SOC_AT91SAM9
-	bool
-	select ATMEL_AIC_IRQ
-	select COMMON_CLK_AT91
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select MEMORY
-	select ATMEL_SDRAMC
-
 config SOC_SAMA5
 	bool
 	select ATMEL_AIC5_IRQ
@@ -92,67 +83,36 @@ config SOC_AT91RM9200
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USB_CLK
 
-config SOC_AT91SAM9260
-	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
-	  or AT91SAM9G20 SoC.
-
-config SOC_AT91SAM9261
-	bool "AT91SAM9261 or AT91SAM9G10"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
-
-config SOC_AT91SAM9263
-	bool "AT91SAM9263"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
-
-config SOC_AT91SAM9RL
-	bool "AT91SAM9RL"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_UTMI
-
-config SOC_AT91SAM9G45
-	bool "AT91SAM9G45 or AT91SAM9M10 families"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_UTMI
-	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
-	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-
-config SOC_AT91SAM9X5
-	bool "AT91SAM9x5 family"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_UTMI
+config SOC_AT91SAM9
+	bool "AT91SAM9"
+	select ATMEL_AIC_IRQ
+	select ATMEL_SDRAMC
+	select COMMON_CLK_AT91
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
-	  This means that your SAM9 name finishes with a '5' (except if it is
-	  AT91SAM9G45!).
-	  This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
-	  and AT91SAM9X35.
-
-config SOC_AT91SAM9N12
-	bool "AT91SAM9N12 family"
+	select HAVE_AT91_UTMI
 	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
+	select MEMORY
 	help
-	  Select this if you are using Atmel's AT91SAM9N12 SoC.
-
-# ----------------------------------------------------------
+	  Select this if you are using one of those Atmel SoC:
+	    AT91SAM9260
+	    AT91SAM9261
+	    AT91SAM9263
+	    AT91SAM9G15
+	    AT91SAM9G20
+	    AT91SAM9G25
+	    AT91SAM9G35
+	    AT91SAM9G45
+	    AT91SAM9G46
+	    AT91SAM9M10
+	    AT91SAM9M11
+	    AT91SAM9N12
+	    AT91SAM9RL
+	    AT91SAM9X25
+	    AT91SAM9X35
+	    AT91SAM9XE
 endif # SOC_SAM_V4_V5
 
 comment "AT91 Feature Selections"
-- 
2.1.0