[PATCH v3 0/6] AT91 DT for 3.20 #1

[Nicolas Ferre]

Le 13/01/2015 19:12, Alexandre Belloni a écrit :
> This series enables RTC on the at91sam9n12 and at91rm9200.
> It also adds nodes for the SRAM availabe on at91 SoCs.
> 
> Finally it adds a dtsi for the at91sam9xe and uses it for the ethernut5 dts.
> 
> Changes in v3:
>  - corrected the 9260 and 9g20 reg properties of the SRAM node
> 
> Changes in v2:
>  - remove the 9x5 errata for the n12 rtc
> 
> Alexandre Belloni (6):
>   ARM: at91/dt: at91sam9n12: Add RTC node
>   ARM: at91/dt: rm9200: add RTC node
>   ARM: at91/dt: at91rm9200ek: enable RTC
>   ARM: at91/dt: add SRAM nodes
>   ARM: at91/dt: Add a dtsi for at91sam9xe
>   ARM: at91/dt: ethernut5: use at91sam9xe.dtsi

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

With the corrected at91sam9rl sram size (0x10000), whole series stacked
on top of at91-3.20-dt.

Thanks.


>  .../devicetree/bindings/arm/atmel-at91.txt         |  1 +
>  arch/arm/boot/dts/at91rm9200.dtsi                  | 12 +++++
>  arch/arm/boot/dts/at91rm9200ek.dts                 |  4 ++
>  arch/arm/boot/dts/at91sam9260.dtsi                 |  5 ++
>  arch/arm/boot/dts/at91sam9261.dtsi                 |  5 ++
>  arch/arm/boot/dts/at91sam9263.dtsi                 | 10 ++++
>  arch/arm/boot/dts/at91sam9g20.dtsi                 |  9 ++++
>  arch/arm/boot/dts/at91sam9g45.dtsi                 |  7 ++-
>  arch/arm/boot/dts/at91sam9n12.dtsi                 | 12 +++++
>  arch/arm/boot/dts/at91sam9rl.dtsi                  |  5 ++
>  arch/arm/boot/dts/at91sam9x5.dtsi                  |  5 ++
>  arch/arm/boot/dts/at91sam9xe.dtsi                  | 60 ++++++++++++++++++++++
>  arch/arm/boot/dts/ethernut5.dts                    |  2 +-
>  arch/arm/boot/dts/sama5d3.dtsi                     |  5 ++
>  arch/arm/boot/dts/sama5d4.dtsi                     |  5 ++
>  15 files changed, 144 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/boot/dts/at91sam9xe.dtsi
> 


-- 
Nicolas Ferre